Parts saws or builders?

[NCPT]

A while back I asked a logger buddy of mine if he had any old saws. He just dropped them off. He said I could have them if I figured out why his 261 wasn't oiling.

There's an 029, 310, 044, and what I think is a 460...the badge is gone but I'm about to look over the cylinder. P&c look great in the 044 and 460 but the 460 piston won't budge. I need to spray something in there to loosen it up.


Probably just part the 029 and 310 but I'm tempted to build the other two.

 

[NCPT]

Pulled the top cover on the 460? and found where all the stink bugs are.

 

[NCPT]

044 cylinder

 

[drf256]

Looks like an 046. Try to build it.

 

[Deets066]

Take the coil off and give em a bath. Gives ya more ambition to work on em if they’re clean. Lol

 

[NCPT]

Looks like an 046. Try to build it.

Yep, thanks. I need to get the piston to free up.

Take the coil off and give em a bath. Gives ya more ambition to work on em if they’re clean. Lol

I sure will.

 

[Terrence Jefferson]

I might be interested in the 310 if you want to part with it.

 

[Al Smith]

If you can't turn the 460 you really don't know if the pistons hung or the bearings .Try penetrating oil first like Kroil, PB Blaster ,liquid wrench .If that doesn't get it and it's hung above the ports you could try the old grease gun and oil trick but unbolt the cylinder first in case the bearings are hung .It will either come or bleed .