ZukiRyder400
Breaker of recoils
- Local time
- 11:39 PM
- User ID
- 5876
- Joined
- Apr 11, 2018
- Messages
- 1,003
- Reaction score
- 4,241
- Location
- NY
I have an old 5 bolt Husqvarna 562XP that my father and my uncle brought home to experiment on... they did their experimentation on it and I wanted do do some as well. One day I was sharpening my husky 372 chain and had to put the bar and chain on the 562 because my 372 needs a carburetor mount and I didn't want to get metal any where near the intake. Even though the intake was stuffed with a paper towel... (I'm paranoid when it comes to that stuff). Any way I got to thinking of this sucker could run... and we had another junk 562 so I robbed parts off of it and slapped them on the semi decent 562. It had gas and bar oil from the last time it was ran so I pulled it over... 3rd pull sheared the flywheel key.... . I had to rob yet another part from the other junk 562 and had to put the recoil grabbers on the good flywheel which took an hour and a half because I didn't know what the ef I was doing. Skip forward a few hours of tinkering... within 3 pulls it fires, another 5 pulls and it fast idles and revs once but stalls. I was hootin' and hollerin' for a good 10 minutes. Here's a vid.