A dummy and the Stihl ms441c

[Mastermind]

This silver piece goes between the carb and intake boot.

 

[redline4]

Ed, I noticed a few pieces in the wrong place between the carb and the jug.

View attachment 331294
This silver piece goes between the carb and intake boot.

Thanks Randy.
I didnt catch that.
I did find out there are 2 "buffers" that are supposed to be on the filter base that fit into the housing as well that are not there and I will need to order.

 

[redline4]

Remove the intake rings.


Push the duct through


And remove airbox.
Your left with a cylinder with what appears to be a Michigan dent puller attached.


Here you can see the impulse and fuel lines and routing.


I need to order those yet, as I forgot..

 

[Mastermind]

Should be two of those silver things.....

Here.

 

[Mastermind]

Here there should be a tall plastic spit back guard of sorts that slides over the studs.

 

[timg]

Ed, Sipping a coffee on break. Here are a couple of tools that may make your life easier on the clutch spring side of things. Oh yes they are your favorite brand. Snap offs of course. They beat a rolling around with a screwdriver.

 

[redline4]

Should be two of those silver things.....

Here.

View attachment 331302

The rings that go in the intake? There was 1 in each.

Here there should be a tall plastic spit back guard of sorts that slides over the studs.

View attachment 331303

I may have missed posting removal of that.

 

[huskihl]

Your left with a cylinder with what appears to be a Michigan dent puller attached.

Yours attaches to the dentee with 4 screws. It’s definitely the central Wisconsin model

 

[redline4]

Yours attaches to the dentee with 4 screws. It’s definitely the central Wisconsin model

Central 'Sconsin model uses 3/4" bolts.
Fur the bigguns.

 

[Mastermind]

The rings that go in the intake? There was 1 in each.

No....these silver things.

 

[huskihl]

Central 'Sconsin model uses 3/4" bolts.
Fur the bigguns.

In Minnesota they just run the screws in from the other side



and stuff

 

[redline4]

No....these silver things.

View attachment 331312

Ok.
I'll have to look at the pile of parts tonight when I get home. As of now it appears I'm missing the one for the strato..

 

[Stump Shot]

In Minnesota they just run the screws in from the other side



and stuff

You don't see 'em doing this chit in da Yoop, they'da traded that sombitch to someone from Minnie-soda, Wisco or the L.P., for a 12 pack of Milwaukee's Best. LOL

 

[Stump Shot]

Ok.
I'll have to look at the pile of parts tonight when I get home. As of now it appears I'm missing the one for the strato..

Just put a dab of JBWeld anywhere your missing something.

 

[redline4]

As @huskihl pointed out, 4 screws and the dent pulling intake apparatus comes off.


Here you can see how the pulse and fuel lines clip in.


This opening here has a rubber grommet that seals it to the airbox. I've already removed, bagged and put in my truck where I can later wonder what I did with it.

 

[redline4]

In Minnesota they just run the screws in from the other side



and stuff

You don't see 'em doing this chit in da Yoop, they'da traded that sombitch to someone from Minnie-soda, Wisco or the L.P., for a 12 pack of Milwaukee's Best. LOL

You know, this mf'er did come from Minnesota...

 

[huskihl]

You know, this mf'er did come from Minnesota...

Used…

 

[redline4]

Used…

Hard...

 

[Stump Shot]

You know, this mf'er did come from Minnesota...

There's no place like "home".

 

[Stump Shot]

Hard...

Stop rubbing it then.