50cc and 20" 3/8 bars

[Miller Mod Saws]

I've been playing with the 5105 dolmars. Not sure I got the recipe yet but they don't run to bad. When I shot this vid this saw has 1 tank of fuel threw it. On this saw I took .020 from base and .010 from squish. 105/120/79 is where I landed. 110/130/70 with 195 comp and .030 squish is where I started. Thought this might be a fun thread. Here what Ya'll got for experience on this baby!

 

[Miller Mod Saws]

 

[Backtroller]

That's a big bar for a 50cc. Very cool.

What are your impressions of it vs the Echo CS500 you recently did?

 

[sunfish]

Runs very good! I like em lil' Dolmars.

I've run a stock 346 with 20" 3/8 a bit and it did surprisingly well.

 

[Miller Mod Saws]

That's a big bar for a 50cc. Very cool.

What are your impressions of it vs the Echo CS500 you recently did?

Well I hate to jump to judgement. I kinda just threw some numbers at this saw and it's not broke it yet. But i have another one to do so I'll build it slowly using this one as a base saw to do a little learning.

 

[Backtroller]

Understandable.

If I won the lottery I'd like to get a 346, 550, 5105, MS261, Echo, Solo,.....all 50cc ish saws, put a similar length bar and chain on each and test them out in various wood with a bunch of guys. Then with more of the lottery winnings send them all out to be ported and repeat the test again.

 

[Miller Mod Saws]

Runs very good! I like em lil' Dolmars.

I've run a stock 346 with 20" 3/8 a bit and it did surprisingly well.

I was just playing as well. I thought it handled it rather well but it really likes .325. Well work on the recipe a little see if we can get it to handle it even better.

 

[Red97]

Nice work.

Thank you for sharing.

 

[wildroamer]

Understandable.

If I won the lottery I'd like to get a 346, 550, 5105, MS261, Echo, Solo,.....all 50cc ish saws, put a similar length bar and chain on each and test them out in various wood with a bunch of guys. Then with more of the lottery winnings send them all out to be ported and repeat the test again.

Will you feed us dinner? Do we get to keep the saws after? I mean for feck's sake you win the lottery, throw me a bone whyncha!

 

[Backtroller]

Shoot, we'd get a pig, a VP tanker truck,.....

I'll have to start buying lottery tickets again

I'm going to be running 3/8" on my 18" 5100s. Can't wait to see how this build turns out.

 

[Miller Mod Saws]

Shoot, we'd get a pig, a VP tanker truck,.....

I'll have to start buying lottery tickets again

I'm going to be running 3/8" on my 18" 5100s. Can't wait to see how this build turns out.

Like I said. This was my first stab. Well get it stronger! Here's the stock 18" 3/8 bar

 

[Miller Mod Saws]

I havnt played with the timing at all yet either. Of course it it's like the 6100 it won't want any part of advancing it.

 

[Red97]

I havnt played with the timing at all yet either. Of course it it's like the 6100 it won't want any part of advancing it.

Where are the jug pics?
Never been into a dolmar. Maybe after my echo kick. Gotta try them all before I decide which brand I like.

limited coil?

Piston give ya much room to play?

I thought I have heard these may be some what carb limited too.

 

[Woodpecker]

Will you feed us dinner? Do we get to keep the saws after? I mean for feck's sake you win the lottery, throw me a bone whyncha!

If I Had a million dollars
We wouldn't have to eat Kraft Dinner.
(But we would eat Kraft Dinner. Of course we would, we'd just eat more.
And buy really expensive ketchup with it.
That's right, all the fanciest Dijon Ketchup)

 

[Miller Mod Saws]

Where are the jug pics?
Never been into a dolmar. Maybe after my echo kick. Gotta try them all before I decide which brand I like.

limited coil?

Piston give ya much room to play?

I thought I have heard these may be some what carb limited too.

I didn't take any. I will take some on my next build. All the saws I had here are waiting on parts. So this was a last minute ahh let's give it a go. Lmao. Yes there limited and a small venturing carb like the echo. The transfers ports are freaking tiny. Not much room to bump the comp without free porting. Muffler mod is a pain in the azzz. Thought about putting a 5100 coil on it to grab the 14500 but this one limits at 13500 and pretty easy to tune so far so I havnt ordered one yet. That's the cliff note version. Lol.

 

[huskihl]

If I Had a million dollars
We wouldn't have to eat Kraft Dinner.
(But we would eat Kraft Dinner. Of course we would, we'd just eat more.
And buy really expensive ketchup with it.
That's right, all the fanciest Dijon Ketchup)

I'd buy you a fur coat (but not a real fur coat. That's cruel).


Lol. These guys are like WTF?

 

[wildroamer]

BNL's rock!

 

[Woodpecker]

I'd buy you a fur coat (but not a real fur coat. That's cruel).


Lol. These guys are like WTF?

Lol I was a little worried about that. But looks like @wildroamer is pickin up what I'm throwin down.

 

[Adirondackstihl]

So this one shouldn't have an issue pulling 60DL of 3/8 then?

 

[Adirondackstihl]

166 did a pretty extensive video comparison of (2) stock 5100S's.
One wearing a modified cat muffler with 3/8 & the other a non cat muffler wearing .325.
The cat wearing, 3/8 saw was noticibly faster 10 outta 10 times.

EDIT: both were 16"