Hiljack06
Active OPE Member
I recently purchased a seized ms440. I plan on using a meteor or hway topend.Is there much advantage to making an unported hybrid?
I would spend the extra coin and get oem . even good used oemI recently purchased a seized ms440. I plan on using a meteor or hway topend.Is there much advantage to making an unported hybrid?
Fair enoughSaws dont stay here long .6-8 tanks and on to the next. I try to keep the price down but make sure the saw is A1.
I have a mildly ported one and the one above ,the one above is much more pissed off sounding .But when working on a hill the milder one is easier to start so i will grab that one ,over 200 psi pulls much harder than 175 psiThis is a very good question. I was also wondering the same thing. It would be kinda cool to see a stock hybrid compared to a ported hybrid.
I really liked how my 10mm ks jug ran on the 440 ,it ran better than a 440 decomp jug ,i would say the bigger piston in the 460 jug helps tourque if you run a longer bar .The tighter 440 crankcase makes the 460 jug run different than if it was on a 460 bottom ,revs quickerPerformance wise is there a lot of difference between your mild hybrid and a stock ms440?
My opinion if your not porting it instead of AM get you an angled fin ks 044 jug or older mahle angle fin and put a new piston and rings in it and that will impress you more than the 460 top end.But I do like to play while they are here.My question is will a 460 topend impress me?
So the mild hybrid revs faster and makes more torque. Is there much difference between the 440 and your mild hybrid in wot rpms and/or rpms in the cut?I really liked how my 10mm ks jug ran on the 440 ,it ran better than a 440 decomp jug ,i would say the bigger piston in the 460 jug helps tourque if you run a longer bar .The tighter 440 crankcase makes the 460 jug run different than if it was on a 460 bottom ,revs quicker
They rev about the same ,i can lean on the hybrid more with a 32 inch bar though over the 044 jug i tested ,the 044 ks early jug ran real nice though .So the mild hybrid revs faster and makes more torque. Is there much difference between the 440 and your mild hybrid in wot rpms and/or rpms in the cut?