Yamabond or Loctite

[rattler]

Ok Men I went and checked the auto parts store today was able to find this

 

[PA Dan]

Ok Men I went and checked the auto parts store today was able to find thisView attachment 31881

That will work buddy! Same as the red from the other company!

 

[rattler]

That will work buddy! Same as the red from the other company!

Alright great Thanks Dan.

Sent from my XT1060 using Tapatalk

 

[T.Roller]

Ok Men I went and checked the auto parts store today was able to find thisView attachment 31881

That's what I used on my 044. Worked great. Like Randy said make sure matting surfaces are super clean and dry

 

[rattler]

That's what I used on my 044. Worked great. Like Randy said make sure matting surfaces are super clean and dry

Will do thanks

 

[MustangMike]

Yea, I found that out the hard way. Randy recommends light sanding and then brake cleaner. I was shocked what the bake cleaner got off when it already looked clean to me.

 

[rattler]

I,ll have to get some more brake cleaner I usually use acetone

Sent from my XT1060 using Tapatalk

 

[Termitebuffet]

Ok Men I went and checked the auto parts store today was able to find thisView attachment 31881

That's it ...I dumb

Zoo City Sawz

 

[Termitebuffet]

I,ll have to get some more brake cleaner I usually use acetone

Sent from my XT1060 using Tapatalk

Me too ...brake clean eats my fingers to much [emoji2]

Zoo City Sawz

 

[jake wells]

i tried the permatex stuff ^^^ it never hardened i wont use it again.
versachem no # 1 or 2 for me.

 

[Termitebuffet]

i tried the permatex stuff ^^^ it never hardened i wont use it again.
versachem no # 1 or 2 for me.

I'm not being a smart arse ...it's aneorobic only hardens with lack of oxygen. ..[emoji2]

Zoo City Sawz

 

[Landmark]

I have only used yamabond on my builds and have not have had any problems but i agree there is way to much waste. Other than that I love the stuff.

 

[jake wells]

i use what a retired chainsaw mechanic told me to use and it works flawlessly.

 

[Red97]

I have been using brakeclean. Wipe with wet rag, then wipe off with clean dry rag. On both jug, and case.

 

[Termitebuffet]

i use what a retired chainsaw mechanic told me to use and it works flawlessly.

Use what you have confidence in ...[emoji200]

Zoo City Sawz

 

[Red97]

Use what you have confidence in ...[emoji200]

Zoo City Sawz

Bubble gum, and shoo goo?

 

[Termitebuffet]

I have been using brakeclean. Wipe with wet rag, then wipe off with clean dry rag. On both jug, and case.

I use q-tips ....[emoji2]

Zoo City Sawz

 

[Keith Gandy]

I like Loctite 518 on base and cylinder. Anareobic and washes out of transfers when squeezed inside. I prep with loctite cleaner and bonding agent in a spray can

 

[Termitebuffet]

Bubble gum, and shoo goo?

Bubble gum is tricky you have to chew it ....just enough ....shoe goo is the bomb .....literally. ..lol

Zoo City Sawz

 

[exSW]

Is this the new oil thread?
I can't wait till bwalker is un banded.

Actually I can. I thought bans were forever here.