working on other builders saws

[jmssaws]

I tune on one a little everytime I start it.
I'm just use to tuning one and can't keep from it.

 

[junkman]

Only time i retune is if change oil brands.

 

[jakethesnake]

Only time i retune is if change oil brands.

Agree. I think all my saws should be that way. It's frustrating when you actually wanna get something done. Not that it takes all that long. But let's say it's cold as hell an u wanna get to work to warm up I really don't like fidgeting around

 

[so il logger]

Only time i retune is if change oil colors.

Now the truth comes out

 

[so il logger]

+lol

For those that have no sense of humor

 

[tree monkey]

sooooooooo, this guy left a few saws,
ported 372, 200t, 346, 440, 460 known bad bearings, 084, and is sending a 660.

I finished up on a 661 and moved on to the 200t.
rope is broke, air filter is getting thin, fuel line cracking but not leaking.
started a list of needed parts.
cleaned the saw up , looks good.
advanced the timing, carb mod, muffler mod, is all I do to these and is now done.
set it aside till I get parts to finish it.

on to the next saw, a 440
started to tear it down to port. start a parts list of needed parts.
take the muffler off and guess what.

 

[tree monkey]

 

[huskihl]

I'm seeing a pattern here...

 

[tree monkey]

saw is stock, rings are still free, saw still ran.

noticed that all three of the saws have new spark plugs. great

 

[jake wells]

i see a lack of oil and a chit tune.

 

[jake wells]

i swear some people can't tune a saw to save their own ass.

 

[dustinwilt68]

Sometimes learning is expensive, looks like this guy better get out the checkbook.

 

[Dub11]

Sometimes learning is expensive, looks like this guy better get out the checkbook.

And run down and buy one off these lol

 

[drf256]

Is the large end rod bearing intact?

What's this guy using as an airfilter? The piston looks wet enough, at least the bit I can see. But the case looks pretty dry.

 

[T.Roller]

And he wants his saws ported? Yikes

 

[Deets066]

Better give him a lesson in saw care

 

[XP_Slinger]

Wow...just wow. That crank is dry as a bone. Couldn't have been running all that good but amazing it did none the less. Have you asked him what oil and ratio he's running? Just curious, not trying to get THAT topic going.

I tune every time I cut too, especially this time of year. 20* one day then 60* then back to 20* sometimes.

 

[mdavlee]

Looks like a dry case. He needs to turn the H screw out a little and put more oil in the gas jug

 

[afleetcommand]

Still 32:1 after all these years....and boy do I get Chit for it from the experts.

 

[jmssaws]

I see saws all the time that are dry as a popcorn fart inside and most of them are on stihl orange at 50:1.

Chainsaw is really hard to kill,it takes persistence.