White whale

[dustinwilt68]

For me it's a 262XPG, missed on 1 from Hungary about a year ago, only 1 I have seen.

 

[Deets066]

Those should be easy.
Last time I checked they were still available new - at an extreme premium price tag though.

A NIB or extremely minty Sachs-Dolmar 105 would intrigue me!

No longer in production on this side of the pond

 

[Bigmac]

The 090 is a whale of a saw for sure...

What’s a o90g then? The fatter slower turtle whale???

 

[Bigmac]

I wouldn’t mind a late production sp125c with chain break, original not restored. And I would like to have nicer versions of some of my saws, but it is nice to have ones that aren’t too nice to use! I would like a minty 064 and a 394/5 and 288xp that’s my next 3-saw plan...lol

 

[jb-chainsaws]

Now it depends on the saw price lol. $150 us for shipping isn’t bad if the saw isn’t 2k


Sent from my iPhone using Tapatalk

Certainly not 2k, she needs some playing around with the coil to be running again and the clutch re-assembling, PM me if you like and we’ll discuss

 

[jacob j.]

For me it's a 262XPG, missed on 1 from Hungary about a year ago, only 1 I have seen.

They also made a 262H - with the funny-looking tri-cycle style handle like they use on saws in Russia to get below the snow line in the winter.

What’s a o90g then? The fatter slower turtle whale???

The G is a hog of a saw - the G Super is an absolute beast. I worked for a logger out of Creswell in the early 90's that had one with a 60" bar.

 

[Bigmac]

They also made a 262H - with the funny-looking tri-cycle style handle like they use on saws in Russia to get below the snow line in the winter.



The G is a hog of a saw - the G Super is an absolute beast. I worked for a logger out of Creswell in the early 90's that had one with a 60" bar.

Was the super g factory? My g has a factory 66mm top end, but it doesn’t say super on it or 0r 090

 

[dustinwilt68]

They also made a 262H - with the funny-looking tri-cycle style handle like they use on saws in Russia to get below the snow line in the winter.


I also know pro safety used to make a full wrap for the 262, would love to find one of those, never knew about the H option though, pretty cool.

 

[RocketRoss57]

I worked for a logger out of Creswell in the early 90's

Creswell Or?

 

[Frankavich84]

Well my buddy here and I got talking, he is a Dolmar guy but had an almost cherry 076 that he rebuilt about 8 years ago. One thing led to another and now I’m a happy owner of a 076! If it just had the extended intake boot for a 076 Super!!! Well that and the chain brake cover and bits would only make it the cats meow! Even sent a 36in Carlton Germany bar with .404 tip and chain that looks brand new. Only needs a air filter and a carb job to run.

So if anyone has a chain brake set up for this thing let me know!

On to the 090 hunt!


Sent from my iPhone using Tapatalk

 

[jacob j.]

Creswell Or?

Yessir, I worked for a guy there and then a guy out of Oakland for a long time. I cut timber for a few companies in the valley.

 

[Frankavich84]

Certainly not 2k, she needs some playing around with the coil to be running again and the clutch re-assembling, PM me if you like and we’ll discuss

Pm sent!


Sent from my iPhone using Tapatalk

 

[RocketRoss57]

Yessir, I worked for a guy there and then a guy out of Oakland for a long time. I cut timber for a few companies in the valley.

Did it happen to be Brink?

 

[sawfun]

I could help you off load the 076 and 090...


Sent from my iPhone using Tapatalk

I have a very nice and clean 076 super that needs to find a new home.

 

[Frankavich84]

I have a very nice and clean 076 super that needs to find a new home.

Ooo pm me your price and some pictures!


Sent from my iPhone using Tapatalk

 

[sawfun]

Ooo pm me your price and some pictures!


Sent from my iPhone using Tapatalk

Will do this weekend

 

[jakethesnake]

My "White Whale" is a saw with 100cc power, 40cc weight, and the exhaust note of a battery powered unit.

Nah homie. They don’t be making them. Be a true moby though

 

[Lightning Performance]

Nah homie. They don’t be making them. Be a true moby though

Someone could. It will be fine just short cycles on the Li.
A small pack, 60v should do.
Ran one. They lack power to favor time. The Esaws are getting lighter, fast.

 

[dustinwilt68]

As I understand it Makita has stopped R&D on gas saws and are going all in on electric, least that's what I heard.

 

[Dub11]

As I understand it Makita has stopped R&D on gas saws and are going all in on electric, least that's what I heard.

Well there goes the neighborhood