What's on your bench?

[tickbitintn]

Actually nothing cause I just cleaned it off...
Haven't been able to see it for too long!
Not sure what's going on it next....

Sent from my XT1635-01 using Tapatalk

 

[Cut4fun]

Another 415 runner after quick check over.
Replaced plug, clutch bearing, washer and e-clip and chain brake set up. Was told reason they quit using it 2 years ago chain brake wouldn't work anymore.
Has the 505 worm gear in it instead of the metal 415 475 one. Wonder if someone had done the 475 updated oiler set up. Still have 2 NOS ones.

 

[heimannm]

The working bench was empty for a minute this morning, the storing bench in front is rather full.



Mark

 

[tickbitintn]

Cool rainy AM...
Play with something of my own.

Sent from my XT1635-01 using Tapatalk

 

[Mkinslow]

Cool rainy AM...
Play with something of my own.

Sent from my XT1635-01 using Tapatalk

I see you've been holding out lol

Sent from my SM-G892A using Tapatalk

 

[tickbitintn]

I've had it quite a while.
I have some large trees down that will require it.
It has too much compression and needs exhaust rasied.
Just never have time to work on it.

Sent from my XT1635-01 using Tapatalk

 

[Mkinslow]

I've had it quite a while.
I have some large trees down that will require it.
It has too much compression and needs exhaust rasied.
Just never have time to work on it.

Sent from my XT1635-01 using Tapatalk

I got ya. I've been trying to get my hands on something that size just to play around with, but I either don't have the money when I find one or I can't even find one lol.

Sent from my SM-G892A using Tapatalk

 

[redline4]

Husky 55. It now belongs to a very good friend of mine. It was his Dad's saw, who is tragically no longer with us.
He dug it out and asked if I could get it running again for his own son.
Ordered a new oem cylinder kit, all new seals and gaskets.

Going to work on getting it completly torn down this week as I am still waiting for the updated oil lines for a 455 I picked up to flip.

 

[redline4]

So heres my dumb question for the day, how does one get the oil pump drive gear off the crank on a Husqvarna 55?

 

[Dub11]

So heres my dumb question for the day, how does one get the oil pump drive gear off the crank on a Husqvarna 55?
View attachment 145605

you can make a puller out of some pipe fittings. I've seen @Sty57 make it. And here is a good guide http://opeforum.com/threads/husqvarna-50-51-55-repair-thread.9332/

 

[redline4]

Thanks Wayne!

 

[Dub11]

Thanks Wayne!

Thank @Onan18 Joe.

 

[redline4]

Thanks @Onan18 and everyone else who contributed to that. I missed that thread completely.

On a side note, got my ugly duck 61 running. Stole the tank off my mostly chinese 268.
Here it is with its better looking cousin.

 

[Johnmn]

Making my jonsered just a wee bit faster!

 

[Dub11]

Making my jonsered just a wee bit faster!

View attachment 145638

What's the filter look like?



Jk

 

[Sty57]

you can make a puller out of some pipe fittings. I've seen @Sty57 make it. And here is a good guide http://opeforum.com/threads/husqvarna-50-51-55-repair-thread.9332/

Here is my cobbled up puller......

 

[Sty57]

Seals, carb kit and fuel line/ filter.....

 

[Sty57]

And painted the muffler.......no mod needed.

 

[drf256]

028S that wouldnt start because of "low compression" at dealer. Buddy asked me to check it out.

 

[tickbitintn]

028S that wouldnt start because of "low compression" at dealer. Buddy asked me to check it out.

That might cause a no start.....
What's the p/c look like?

Sent from my XT1635-01 using Tapatalk