What's on your bench?

[MG porting]

Fibre type sand paper that comes in roles it would be better to use.

I ment burlap. Lol

 

[Bigmac]

Oh fun stuff he said it won't rev. Lol and the carb needs to be rebuildt. View attachment 137357 View attachment 137358

Dang! That is one nasty screen!

 

[MG porting]

Dang! That is one nasty screen!

Lol. Yep I have to say it's the worst one I've seen in a long time.

 

[JohnnyBlade]

So just a few things ive noticed different from the ms210 stock motor to the ms250 China motor.....
Head bolts on stock r coarse thread to the max
China r M5
Clam shell stock has rounded groove for gasket maker, China has square
Recessed holes in clamshell r smaller/ not big enough to seat correctly in the brass bushings in the motor saddle

 

[JohnnyBlade]

 

[MG porting]

View attachment 137371

You my need to do some dremel work on it to make it fit just take your time.

 

[JohnnyBlade]

Yes i have 2 options i can think of.
1. Do what u said and try and not
Wayne's World it....
2. Use the stock one.
Im not sure yet.

 

[JohnnyBlade]

 

[Bigmac]

View attachment 137372

There are so many good part in that movie...so quotable!

 

[MG porting]

There are so many good part in that movie...so quotable!

Lol

 

[Bilge Rat]

Getting these 4 mix motors off my bench soon.
Found 2 weak coils, low RPM and new rings for low compression.
I have trimmed all the hedges and anything that got in the way with the first rebuilt motor.

The 4 mix does not sound right to me but they do seem to have enough torque to work.
Looking forward to putting new carbs on 2 Wild Things so i can get them off the floor.
And why does this purple saw have such a committed following?

By next week all the junk on the floor will be fixed and outta here except for this Hoosky 365.
We will see if it warrants a spot on the shelf or continue to live on the floor.

I have earned a few points by fixing the wife's dishwasher.

 

[czar800]

I haven’t been playing with many saw this summer, but I did tinker with a few this evening.

 

[T.Roller]

Got the bottom end and tank mounted on the chinese buildoff saw tonight.

 

[MustangMike]

Does your carb plate stick shut? Is the hole on the inside of your brake flag too small to fit over the post?

 

[T.Roller]

Does your carb plate stick shut? Is the hole on the inside of your brake flag too small to fit over the post?

Didn't get that far. Just put the bottom end together and tank mounted. Gonna run timing numbers tomorrow and get the cylinder sent off for machine work

 

[Duane(Pa)]

Just gonna' send it!

 

[T.Roller]

Just gonna' send it!

Huh

 

[MustangMike]

BB or Regular?

 

[T.Roller]

BB or Regular?

Chinese 460

 

[Duane(Pa)]

Huh