What's on your bench?

[usmcbuckwild]

Funny you should say that: when I grow up I want to be an engineer

 

[Dub11]

Roughed in the ports and transfers on the 7900 jug:

View attachment 120675 View attachment 120676 View attachment 120677 View attachment 120678

Got some smoothing and final shaping to do before sand and polish

Looks good.

 

[usmcbuckwild]

Looks good.

Thank you! Real credit goes to those who already did all the R&D and figured out what works, what doesn’t and were kind enough to post it on the interwebs so the rest of us slackers could learn from their mistakes!! My first Dolmar jugs are this one and the 133s.

 

[460 magnum]

Got the 10-10 running real good. Just need an air filter, fuel cap gasket, tank vent, and chain. But runs and oils nicely.
064 I just bought from my boss had been worked on by a co-worker and would run either pig rich or super lean at an idle.......WELL....it must have been a Friday as when he kitted the carb he put the pump gasket on the bottom instead of the top of the thick gasket. AH well......if it wasn't for that simple mistake I would have paid way more for the saw so I'm rather happy that's what he did. lol View attachment 120653

Would love to get my hands on a 064

 

[ranchdadmike]

View attachment 120609 View attachment 120610

I think I know that saw!

 

[rattler]

I think I know that saw!

I thought you might

 

[usmcbuckwild]

Now i have to wait on parts


Than handle/tank was SUPPOSED to be here today. USPS shows out for delivery but its a no-show.

 

[Fruecrue]

Now i have to wait on parts

View attachment 120732 View attachment 120733
Than handle/tank was SUPPOSED to be here today. USPS shows out for delivery but its a no-show.

So you have some 133 time then.....

 

[usmcbuckwild]

So you have some 133 time then.....

Yup. That’s the plan for tomorrow.

 

[tickbitintn]

Something that has been here too long....

Sent from my XT1635-01 using Tapatalk

 

[460 magnum]

Ok guys got a question on a 044 I'm trying to put the oil pump back in and the metal line that has the o-ring on it doesn't want to seat down in the hole like it should is there something I'm missing? A trick or something? I thought it just pushes right in place

 

[heimannm]

I started the day with two 82 cc McCulloch saws disassembled and mostly cleaned up, with a bunch of other parts mixed in just to make it interesting.



Ended up with this...



I learned today that the flywheel cover for the PM800/805/8200 saws are different from all the others so I will be hunting for a cover for this one. Over the past two or three weeks I have managed to put together four 82 cc from parts saws I picked up over the past several years in addition to rebuilding a PM850 and an SP81. It has been a good stretch.

Mark

 

[tickbitintn]

Well the 028s started in two pulls and barely needed any screw tweaking to idle, rev and run just right!! That's the way it should be...
First saw I've worked on in over a month, more like two actually...

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

I started the day with two 82 cc McCulloch saws disassembled and mostly cleaned up, with a bunch of other parts mixed in just to make it interesting.

View attachment 120783

Ended up with this...

View attachment 120784

I learned today that the flywheel cover for the PM800/805/8200 saws are different from all the others so I will be hunting for a cover for this one. Over the past two or three weeks I have managed to put together four 82 cc from parts saws I picked up over the past several years in addition to rebuilding a PM850 and an SP81. It has been a good stretch.

Mark

Looking good as usual! Nice work.
Much cooler than an old 028S...

Sent from my XT1635-01 using Tapatalk

 

[rattler]

I think I know that saw!

 

[usmcbuckwild]

View attachment 120792

Did those seals show up today?

 

[rattler]

No Sir they did not I will let you know when they get here. And Thank you once again.

 

[usmcbuckwild]

No Sir they did not I will let you know when they get here. And Thank you once again.

Are you kidding me? The USPS is a bunch of cock-sucking-communist-*f-wordheads

 

[Dub11]

Are you kidding me? The USPS is a bunch of cock-sucking-communist-*f-wordheads

I had them deliver a day early on one package and a day late on another last week.

But they got there not bent........

 

[usmcbuckwild]

I had the deliver a day early on one package and one a day late last week.

But they got there not bent........

It pisses me off because this is the 3rd time this week USPS have been late delivering. 2 times my packages were displayed “out for delivery” in the tracking (1st was OFD on Monday and didn’t arrive until Thursday) and my 7900 tank was marked OFD today and didn’t show up: now Rattler has to wait until Monday for those seals. Shiite like this drives me insane!