What's on your bench?

[hacskaroly]

i would have guessed that it was becaused its says germany

Also, the little symbol is another giveaway:

 

[pbillyi69]

Also, the little symbol is another giveaway:

View attachment 484153

View attachment 484152

i didnt know that was their logo

 

[K Mueller]

Regarding an 064, the piece that drives the oil pump gear was broke off and missing. If memory serves me correctly this washer isn’t needed with the larger shoe retainers? It was probably bound and broke off.

 

[singinwoodwackr]

Regarding an 064, the piece that drives the oil pump gear was broke off and missing. If memory serves me correctly this washer isn’t needed with the larger shoe retainers? It was probably bound and broke off.
View attachment 484204

Worm gears are easy to find. Eliminating that washer may screw up the clutch height.

 

[Shane¹]

346 ne going together should be a pretty nice saw. Tried using braze on this muffler mod came out ok for the first one

 

[Shane¹]

Found some unfortunate information on my 2100 hybrid dolmar. Has not been oiling good found out the case is cracked in the oil passage so looks like it will need a case half

 

[singinwoodwackr]

Found some unfortunate information on my 2100 hybrid dolmar. Has not been oiling good found out the case is cracked in the oil passage so looks like it will need a case half

View attachment 484207

So, Dolmar case, not 2100…

Just weld it up and call it good.

 

[singinwoodwackr]

346 ne going together should be a pretty nice saw. Tried using braze on this muffler mod came out ok for the first one

View attachment 484205

View attachment 484206

That side exhaust is a bit much for 50cc…

 

[drf256]

461 Stihl port and redo

 

[stihl livin]

That side exhaust is a bit much for 50cc…

Looks similar to my muffler outlet on my xs2152.

 

[Shane¹]

That side exhaust is a bit much for 50cc…

Looks just like my farminkarman 346 may have stole the design from it

 

[EFSM]

461 Stihl port and redo

View attachment 484215View attachment 484216View attachment 484217View attachment 484218View attachment 484219

What happened? Failed big end rod bearing?