What's on your bench?

[Keith Gandy]

Couple OEM topends put on these 440 and 460 today. 440 was ran lean and ring pin came out on 460.

 

[Keith Gandy]

HELP!! Got a few in the shop!! 440s, 460s, 660s,461, 270, 441s, 200t's

 

[dall]

HELP!! Got a few in the shop!! 440s, 460s, 660s,461, 270, 441s, 200t's View attachment 64118

silver eagle said he will take all the 270s you have @Canadian farm boy

 

[a. palmer jr.]

Today it's my Dolmar PS5100S which had a bad piston/cylinder plus I had a PS5105 which had nothing but a good piston/cylinder so I combined the two and made one that hopefully will run. I still have some carburetor work to do but it's getting there.. I can say that I don't care for the way Dolmar holds their intake boot on the cylinder..

 

[Keith Gandy]

Can anyone steer me in the direction of a 461 left side crankcase half and a fuel tank instead of full price new OEM?

 

[Canadian farm boy]

silver eagle said he will take all the 270s you have @Canadian farm boy

I don't need any more ms270s. 1 POS is enough. Lol

 

[Czed]

Mom bought me the Alpina vip 25 brushcutter in front in 1990 i went to service it for summer three pumps of the primer and she started and idled it's been setting since last spring full tank red armor lol i bought a new echo brushcutter but these alpinas have more power and a hold button i can set it to one speed and not touch it all day when trimming or using a blade i have four still on the first one lol

 

[Keith Gandy]

View attachment 64123 View attachment 64124 Mom bought me the Alpina vip 25 brushcutter in front in 1990 i went to service it for summer three pumps of the primer and she started and idled it's been setting since last spring full tank red armor lol i bought a new echo brushcutter but these alpinas have more power and a hold button i can set it to one speed and not touch it all day when trimming or using a blade i have four still on the first one lol

That Red Armor is almost as good as Cialais!!!

 

[Dub11]

HELP!! Got a few in the shop!! 440s, 460s, 660s,461, 270, 441s, 200t's View attachment 64118

It looks bad you can send some to me to alleviate that problem lol

 

[MustangMike]

Ditto, any 440 chasis you want to get rid of, just let me know! I have access to both 460 and slant fin 044 jugs.

 

[Keith Gandy]

Ditto, any 440 chasis you want to get rid of, just let me know! I have access to both 460 and slant fin 044 jugs.

All customers saws Mustang. Gotta rebuild several of them completely and the guy told me he had several 066s, 064s, 036s, 360s, and 361s to rebuild. Im gonna be busy!!

 

[drf256]

Couple OEM topends put on these 440 and 460 today. 440 was ran lean and ring pin came out on 460.View attachment 63920View attachment 63921 View attachment 63923View attachment 63925

Where do you get the Soul Glow for your saws Keith?

 

[bretts]

HELP!! Got a few in the shop!! 440s, 460s, 660s,461, 270, 441s, 200t's View attachment 64118

You lucky lucky man.

 

[Keith Gandy]

Where do you get the Soul Glow for your saws Keith?

3-36!!

 

[tp2177]

Won't fit on my bench but working on an older craftsman push behind edger and a push behind weedeater. Both need carbs rebuilt. The tecumseh engine on the weed eaters carb is just $11. It won't be rebuilt. The 4hp Briggs carb is $123??


Sent from my iPhone using Tapatalk Pro

 

[Keith Gandy]

Won't fit on my bench but working on an older craftsman push behind edger and a push behind weedeater. Both need carbs rebuilt. The tecumseh engine on the weed eaters carb is just $11. It won't be rebuilt. The 4hp Briggs carb is $123??


Sent from my iPhone using Tapatalk Pro

Ya Sears parts r ridiculous if one goes direct!! Best bet is probably Fleabay

 

[Keith Gandy]

Best bet is probably Fleabay Look at this on eBay http://www.ebay.com/itm/262030246737

 

[tp2177]

Best bet is probably Fleabay Look at this on eBay http://www.ebay.com/itm/262030246737

Thanks! These are my first "customer" jobs so I'm still new for looking at parts. That's cheaper than the rebuild kit from sears.


Sent from my iPhone using Tapatalk Pro

 

[Keith Gandy]

Thanks! These are my first "customer" jobs so I'm still new for looking at parts. That's cheaper than the rebuild kit from sears.


Sent from my iPhone using Tapatalk Pro

HLSupply and Dave at DMS is where I look for my parts 1st because they are site owner/sponsors here

 

[tp2177]

HLSupply and Dave at DMS is where I look for my parts 1st because they are site owner/sponsors here

Thanks. I'll definitely keep that in mind!


Sent from my iPhone using Tapatalk Pro