What's on your bench?

[skippy]

2165 will be up again. I found some bearings in my piles of parts.

Good I was following

 

[mdavlee]

Good I was following

Going to go wipe the case halves off good and start warming them up. Might throw them in the oven and then if need be use the heat gun on the pockets.

 

[skippy]

Thanks for keeping us in the circle

 

[Andydodgegeek]

My bench has an absolute mess on it right now. Rebuilding a Carb on a 451ev Jonsereds, waiting on a part. I have my skidsteer in the garage looking for a intermittent short in the BICS system. Sarah's 1948 Power Wagon is on the hoist for brake work. Brother in law just gave me 2 concrete saws to try to get running. And I just want to go ice fishing!!!

 

[skippy]

My bench has an absolute mess on it right now. Rebuilding a Carb on a 451ev Jonsereds, waiting on a part. I have my skidsteer in the garage looking for a intermittent short in the BICS system. Sarah's 1948 Power Wagon is on the hoist for brake work. Brother in law just gave me 2 concrete saws to try to get running. And I just want to go ice fishing!!!

Andy it tells me you are using it

 

[Mastermind]

Our shop is mess. Worse than normal. We've been at it for a few weeks and haven't stopped to clean.

 

[Keith Gandy]

That's the way we used to do the 261 Keith.

I was loading up alil off a long idle and goin to try this with the strato ports. What u think? I had plenty of torque at 108/120/78 and went 105/ 120/78?

 

[Mastermind]

I like a real short blowdown time on the strato saws. On the 241 I use 105/118/ factory intake height. Any idle issues?

 

[Keith Gandy]

I like a real short blowdown time on the strato saws. On the 241 I use 105/118/ factory intake height. Any idle issues?

No idle issue but a slight bobble off a long idle. Figured Id partially bellzona the strato intakes since I hogged them out pretty good and try that

 

[skippy]

I was loading alil off along idle and goin to try View attachment 1551 this with the strato ports. What u think. I had plenty of torque at 108/120/78 and went 105/ 120/78?

What is that off of Keith?

 

[Keith Gandy]

What is that off of Keith?

241c, its a runnin son of a gun but I still had alota meat on the bone and took alil off with exhaust. Maybe get alil more rpm in cut

 

[skippy]

241c

Oh a slow stihl OK thanks buddy

 

[Mastermind]

No idle issue but a slight bobble off a long idle. Figured Id partially bellzona the strato intakes since I hogged them out pretty good and try that

I think it will be fine opened like that. I did a bunch of 261s like that. After the C version came out I gave up on it though. I can make them run as well with the stratos intact, and they use way less fuel.

 

[beaglebriar]

Threw this together today. Should be a little nicer than knocking them apart with a hammer.

 

[skippy]

Threw this together today. Should be a little nicer than knocking them apart with a hammer.View attachment 1815

Looks like it will work

 

[Mastermind]

Very nice.

 

[Canadian farm boy]

Just threw it together....ok Looks great for being thrown together. Nice job BTW. You get two hairy thumbs up from me

 

[ft. churchill]

I got a homie super 2 in for a carb kit job.

 

[Keith Gandy]

440

 

[Keith Gandy]

View attachment 1906 440