What's on your bench?

[Agent Smith]

Doing a little work on a buddys saw. You fellas ever seen a casting flaw like that in the squish/ combustion area? First time I've seen that on oem stuff. Squish measures .025 both sides after machining.

 

[PA Dan]

Guess what oil. Hahahaha
View attachment 227912

Stihl Ultra FTW!

 

[WillG]

Got the base tune on the hybrid. Just need a bar and chain then it's to the wood! Oils nicely, idles nice and accellerates nice!

Sent from my E6910 using Tapatalk

 

[Matt Ellerbee]

Buy a dial indicator, magnetic base and some painted lead marking compound. When you figure out what use them on your going to make a lot of money on the side. It's going back on my list of things to do when a shop is up and running, again.

I gave up on using the correct tools and went to feel and site to get it just right. Some of the tools required slow down the process.

Enlighten me.

 

[redlight066]

Stihl Ultra FTW!

What gave it away?

 

[PA Dan]

Enlighten me.

What are you asking for?

 

[a. palmer jr.]

Working on an 046 Stihl that kicks back violently when I try to start it. I put it together using stock parts with the right pt. nos. and am about afraid to try to start it again it kicks so bad. I'm wondering if I can set the timing back a few degrees..

 

[PA Dan]

What gave it away?

Lucky guess...reminded me of a 193t I worked on. Saw starts but wont cut! Screen was completly plugged and about 1/16" thick in the exhaust port! Unreal!

 

[p61 western]

What are you asking for?

LED

 

[PA Dan]

LED

Be careful what you ask for...

 

[p61 western]

Be careful what you ask for...

Lmao exactly

 

[Matt Ellerbee]

What are you asking for?

Spiritual guidance.

But really, I don’t know what lighting is talking about.

 

[PA Dan]

Spiritual guidance.

But really, I don’t know what lighting is talking about.

Not sure anyone does...

 

[cus_deluxe]

Spiritual guidance.

But really, I don’t know what lighting is talking about.

Not sure anyone does...

 

[jk14]

Not sure anyone does...

Exactly....

 

[Mkinslow]

Lots of stuff on my bench, just been fighting one sickness after the other last few weeks and haven't gotten much accomplished, other than getting behind on everything. But itll all be alright [emoji846]

Sent from my SM-G892A using Tapatalk

 

[Bigmac]

Working on an 046 Stihl that kicks back violently when I try to start it. I put it together using stock parts with the right pt. nos. and am about afraid to try to start it again it kicks so bad. I'm wondering if I can set the timing back a few degrees..

You can. Is the decomp new? I put in the larger husky ones with 2 holes, 372 or 390. It helps a lot! Had a 461 that was pretty bad, an that helped, also if it’s a fresh build, they also seem to start hard new and get a little easier after a few tanks. But if you haven’t already, try the husky decomp

 

[Canadian farm boy]

MS440/MS460/272xp hybrid

 

[Wonkydonkey]

Is it done yet,,,,,where’s the vids @Canadian farm boy

 

[Canadian farm boy]

Is it done yet,,,,,where’s the vids @Canadian farm boy

Hopefully this weekend. I’m planning to start porting it tonight.