What's on your bench?

[Bigmac]

I’m waiting on one seal before I can run it. I figured out the number of drive links.

For the weights and measurements crew..lolView attachment 190202

How long of bar?

 

[Backtroller]

Is that pho only? If not that’s pretty close since the bar weighs 5 pounds 4oz alone.

 

[Backtroller]

It’s an odd ball 122dl 36” so....it’s probably 38”ish. I made a post about it.

 

[Bigmac]

Is that pho only? If not that’s pretty close since the bar weighs 5 pounds 4oz alone.

Ya pho! Lol that would bring the sp125 to 28.8

 

[justoldsaws]

I’m waiting on one seal before I can run it. I figured out the number of drive links.

For the weights and measurements crew..lolView attachment 190202

I was a little concerned on the weight of the 3120 when i got mine, but once its on the log and in the cut its not a bother, quite a nice saw to run.

 

[backhoelover]

View attachment 220 the start of an 036 build

Never nice

 

[Cut4fun]

Is that pho only? If not that’s pretty close since the bar weighs 5 pounds 4oz alone.

I should have weighed the 3120 I shipped out PHO. Just never thought to do that to save the weight.

I only weighed it once it was packed up to ship. Would have to dig through fedex to even find that.

I'm sure someone has that saved somewhere.

I know when a local brings his over with 44" or 60" I'm like I sure wish you would have put the 36" on. Last time he got the hint and brought it 20".

 

[Backtroller]

I was curious. All parts except a seal

 

[NCPT]

Probably will be done by winter as I'm not fully retired yet and still running the tree service solo.

Already got plans and looking at 1983 Honda CR250R parts for a 250 hotsaw build. This is also a right hand ignition engine which will follow my design of my YZ125 saw.
The 1983 CR250R was the predecessor of the CR250R every one loves. The 1983 connecting rod and bearings are the same part # right up to the 2001 model which was the end of the CR250R dynasty.

So I'm just sitting here in my shop chair pondering my next move while I knock off horse flys coming in through the open door with my BUG-A-SALT gun.
Even got a red dot laser sight, Lol.
View attachment 189954

I will be looking for it. Now, tell me more about the bug-a-salt.....I looked it up, looks fun.

 

[Cut4fun]

I was curious. All parts except a sealView attachment 190266

Thank You.

Good to see something besides the paper specs that are usually wrong. But not to far off. 22.9lbs Think that .9 is like 14.4oz

 

[Bigmac]

I was curious. All parts except a sealView attachment 190266

That’s super close to the sp125! Fun to know!

 

[Bigmac]

Start a kart saw build, sp125/101b
Got the short block together tonight! And started a build thread

 

[Cut4fun]

That’s crazy heavy! Just took this to seeView attachment 190235

Was that a 125? Saving info to weight boards. http://chainsawrepair.createaforum.com/chain-saw-weights/

Had this saved in the misc pho weights

McCulloch 125sp 24lbs.09oz
McCulloch 890 28lbs.09oz

 

[Bigmac]

Was that a 125? Saving info to weight boards. http://chainsawrepair.createaforum.com/chain-saw-weights/

Had this saved in the misc pho weights

McCulloch 125sp 24lbs.09oz
McCulloch 890 28lbs.09oz

Yes an sp125c

 

[huskyboy]

I’d rather run a 394/5 over a 125, 880 or 3120 unless I wanted to run a 50” bar.

 

[rattler]

 

[Quzick]

Tweaking...

 

[NCPT]

View attachment 190473 View attachment 190474

Woohoo, that's mine. Looks great Mike, can't wait to get my hands on it.

 

[rattler]

Woohoo, that's mine. Looks great Mike, can't wait to get my hands on it.

Yes Sir it sure is i will let you know as soon as i run her

 

[Czed]

Tweaking...

Looks good
Do you have mud daubers there?
Without a screen I've fixed dozens of saws/trimmers
With daubers nests in the mufflers.