What's on your bench?

[chipper1]

Nothing, it will not do anything now. Was an intermittent issue but now nothing at all. Have it tracked down to the safety interlock module, new one should be here today.

I put a time automatic resettable fuse, once it acted up I was able to find it because the wires were hot . Sometimes you gotta give them the smoke test lol.
Sure hope the module takes care of it in that one.

 

[redline4]

Nothing, it will not do anything now. Was an intermittent issue but now nothing at all. Have it tracked down to the safety interlock module, new one should be here today.

Things are so much easier to diagnose and fix when they are actually broke.
Not, it was broke yesterday but works just fine now.

 

[Deets066]

Nothing, it will not do anything now. Was an intermittent issue but now nothing at all. Have it tracked down to the safety interlock module, new one should be here today.

Check the fuse.....

@big t double

 

[Czed]

Got a freebie 235 just needed carb tunage
The locked up 455 is fine now
New line's and carb
soaked the bottom end in red armor mix it freed up.
4 tanks through it runs like any 455it's about as heavy as my 268.

 

[merc_man]

My mac d44 has been hangin out on my bench for about a month now. Its finally mostly back togeather. Got to split the tank to clean it out. It was locked up tighter then bark to a tree. It made its first pop today after a shot of fuel in the carb. Hope to get back at it soon and get the tank figured oit so i can pour a little fuel in it soon.

Sent from my SM-G950W using Tapatalk

 

[heimannm]

Got it looking like this...



I thought it needed to be cleaned up a bit so I stripped it down...hope I can get it backed together before I forget any important details.

I did remove the batteries since they were starting to leak through the battery cases.



Mark

 

[huskihl]

 

[big t double]

Check the fuse.....

@big t double

Always...check the fuse.

 

[Onan18]

Check the fuse.....

@big t double

Always...check the fuse.

Checked both and they were good, wish it was that easy...

 

[Deets066]

Checked both and they were good, wish it was that easy...

Are you sure there is only 2? Lol

 

[Deets066]

Checked both and they were good, wish it was that easy...

Had one like this that was hiding good. Damn near scrapped the mower over it. Lol

 

[big t double]

View attachment 175045 View attachment 175046

Had one like this that was hiding good. Damn near scrapped the mower over it. Lol

You should still scrap it.

 

[Cut4fun]

Somebody has a pretty one .

Just needed alittle loving is all. All better now.

 

[chipper1]

View attachment 175045 View attachment 175046

Had one like this that was hiding good. Damn near scrapped the mower over it. Lol

What was that on/what was wrong with it.

 

[Deets066]

What was that on/what was wrong with it.

Dixon mower, would run fine then sputter and die. Changed this and that, didn’t work. Ted got it to run fine but couldn’t move the sticks. It would die, like the safety interlock.

Finally found the buried fuse

 

[chipper1]

Dixon mower, would run fine then sputter and die. Changed this and that, didn’t work. Ted got it to run fine but couldn’t move the sticks. It would die, like the safety interlock.

Finally found the buried fuse

Good to know.
Does it have autotune on it lol.

 

[Stump Shot]

Nothing but fun today.

 

[Deets066]

Nothing but fun today.

View attachment 175060

What kind of jig you got there?

 

[Deets066]

Rollomatic roller nose

 

[Stump Shot]

What kind of jig you got there?

CC Specialty's.

Edit: on the cylinder.