What to look out for on the 440 kit?

[slackinoff]

@MustangMike - HF pics would be a good idea too. I need to grab some. My pics are cheap dental pics and are not stiff enough.

 

[MustangMike]

I just use the strait one, put it under the spring curve and in the hole and lift the handle. They usually go right in.

 

[Maintenance Chief]

I use tiny needle nose vise grips.

 

[MustangMike]

This:

https://www.harborfreight.com/mini-pick-and-hook-set-63697.html?_br_psugg_q=pick+set

 

[slackinoff]

Has anyone tried a pop up piston in these 440’s?

 

[Ketchup]

Hi guys
I’m considering some AM parts for a play saw. Has anyone had trouble with the oiler or crank on the g440s? Can the oiler lubricate a 28” bar?

 

[Maintenance Chief]

Hi guys
I’m considering some AM parts for a play saw. Has anyone had trouble with the oiler or crank on the g440s? Can the oiler lubricate a 28” bar?

The only problem I have is when I got the cheapest AM one I could find , the outlet tube was always off ?

 

[slackinoff]

Hi guys
I’m considering some AM parts for a play saw. Has anyone had trouble with the oiler or crank on the g440s? Can the oiler lubricate a 28” bar?

This is a super late reply sorry - But I have not had a lick of trouble with the crank or oiler in mine. It puts out bookoos of oil, plenty for a 28. Only trouble I have had was clutch springs. I replaced all the clutch springs with OEM and it's been fine.