What oil is best? and what ratio?

[CoreyB]

Dolmar synthetic oil is the coolest blue!

 

[Deets066]

I'll find / make something close to 8x8 and give it a go

Kev, from what I gather you build stumpin work saws. 8x8 pine ain't gunna do ya no justice

 

[Brewz]

Well I finally got my hands on a bottle of Klotz benol.

What was the general consensus for the best mix ratio using E free 91 RON fuel?

It sure smells good un mixed

 

[Brewz]

I just mixed some at 50:1 and ran it in the oh sixty six

Almost zero smoke, unofensive smell and fumes, and talk about snappy!

It blips up like an F1 car on this mix.

Smell reminds me of when we would take my wife's kids racing RC gas cars

 

[Moparmyway]

Kev, from what I gather you build stumpin work saws. 8x8 pine ain't gunna do ya no justice

True, but this particular cylinder excells with a shorter bar, I'll probably have to run a used round RS, but I might have time to square it up.

I'm not thrilled about this cylinder getting gobbled up so quickly, but I've still got my notes

 

[the GOAT]

Dolmar synthetic oil is the coolest blue!

Stihl ultra is the worst, can hardly tell if you remember to put the oil in.

 

[mdavlee]

Kev, from what I gather you build stumpin work saws. 8x8 pine ain't gunna do ya no justice

Sometimes those are the fastest too. A simple Woods ported 365 beat my 046 giving up 11cc in the cants. I wouldn't ask the 365 to pull the 110dl chain on a mill either.

 

[Brewz]

Stihl ultra is the worst, can hardly tell if you remember to put the oil in.

The BP 91 RON fuel I have is already a pale red color, and when I mix the Klotz Benol at 50:1, it makes almost no difference to color.

I cant wait to go run a couple tanks through it and see what it looks like inside afterwards.

I have high hopes!

 

[mdavlee]

The BP 91 RON fuel I have is already a pale red color, and when I mix the Klotz Benol at 50:1, it makes almost no difference to color.

I cant wait to go run a couple tanks through it and see what it looks like inside afterwards.

I have high hopes!

Probably need to look into fuel dye. It's great to be able to look and easily tell.

 

[Cut4fun]

Dolmar synthetic oil is the coolest blue!

I thought that about the Poulan synthetic I was mixing up 40:1 the other day. Heck might be the same oil.

 

[Cut4fun]

This little 3900 echo didnt miss a beat at 32:1 on KL-200 for 3 days of cutting roof sub, trusses, gables, walls, etc.

 

[Keith Gandy]

This little 3900 echo didnt miss a beat at 32:1 on KL-200 for 3 days of cutting roof sub, trusses, gables, walls, etc.


View attachment 20157 View attachment 20158 View attachment 20159 View attachment 20160

Dang dirt bike oil!!!

 

[CoreyB]

I thought that about the Poulan synthetic I was mixing up 40:1 the other day. Heck might be the same oil.

Shoot it could be. If so I like it.

 

[jake wells]

I'd run any syn or HDEO 10w30. What do you run?

rotella t 10w30 holds 2-3 ozs.

 

[jmssaws]

I beat the *s-word out of a couple saws today on valvoline at 32:1.
No smoke/smell and my saws still run

 

[jake wells]

This little 3900 echo didnt miss a beat at 32:1 on KL-200 for 3 days of cutting roof sub, trusses, gables, walls, etc.


View attachment 20157 View attachment 20158 View attachment 20159 View attachment 20160

you broke my house!!

 

[PissRev]

rotella t 10w30 holds 2-3 ozs.

 

[PissRev]

I did some home brewing today. I mixed 80% Motul 710 with 20% Klotz Benol then I mixed the brew @ 44:1. Very little smoke and the exhaust smelled nicer than plain 710. I figured I'd have the cleanliness of a FD oil with the film strength of castor. Yeah I know I could have just gotten some Super Techniplate but I already had both the 710 and Benol.

 

[PissRev]

FYI I just looked at my 6.4 oz bottles of Husky XP oil and all of them have 7 oz in them. I guess the bottler is compensating for the oil film that is in the bottle and won't pour out.

 

[jmssaws]

I did some home brewing today. I mixed 80% Motul 710 with 20% Klotz Benol then I mixed the brew @ 44:1. Very little smoke and the exhaust smelled nicer than plain 710. I figured I'd have the cleanliness of a FD oil with the film strength of castor. Yeah I know I could have just gotten some Super Techniplate but I already had both the 710 and Benol.

Wasting good benol mixing with that motul swill. Lol