Tillotson Carb Talk

[JohnnyBlade]

Heres some pics. New needle on left old on right. I do see a slight variation that i pointed out with the pic. The old shaft is a fuzz longer. Bit i had pressure problems with both so im ruling that out. Im gonna try and clean the seat and go from there. Thanks for the imput so far and i will keep u guys posted.

Poast edited: to add link for @JohnnyBlade because he couldn’t finger it out on his own. Sew I did it for him like I did his mom last night. Because I’m such a nice feller

*******************************************
https://tillotson.ie/kits-parts/carburetor-to-kit-cross-reference/
***************^***************************

 

[JohnnyBlade]

Original up top. 2 in the new kit below. Which one would be best? Most kits ive done u use the tan one but this is my first tilly. Maybe the "it seems" thicker one is the way to go? IDK? Cleaned the seat real good with multiple tooth picks and paper towel till no more color came off. Then a lil more. Gonna put back to gether with tan diaphram and pressure test.

 

[huskihl]

I use the tan ones. They seemed to have the best characteristics of the 3 or 4 different types.

 

[JohnnyBlade]

Heres my set up. The @StumpShot water trick reveals its leaking from the hole on top of the carb wer the pic is pointing. That means my needle still isnt seating properly. Now on another level it held pressure longer under water so i will market this one as an underwater chainsaw

going back in it looks like

 

[JohnnyBlade]

I use the tan ones. They seemed to have the best characteristics of the 3 or 4 different types.

Ya i know on the 199's the blue one comes out and tan goes in. So i always just used tans from then on. Thanks for the reassurance! Do u need an underwater saw Kev? Cuz i know a guy

 

[JohnnyBlade]

*******************************************
https://tillotson.ie/kits-parts/carburetor-to-kit-cross-reference/
***************^***************************
So I stumbled across this searching for a carb kit. Might be the coolest info ive found so far. I dont know if possible but it would be cool if this link could be the first post in this thread.... oh hey Brad! @Woodpecker

 

[Woodpecker]

*******************************************
https://tillotson.ie/kits-parts/carburetor-to-kit-cross-reference/
***************^***************************
So I stumbled across this searching for a carb kit. Might be the coolest info ive found so far. I dont know if possible but it would be cool if this link could be the first post in this thread.... oh hey Brad! @Woodpecker

I fixed you up bud.

 

[JohnnyBlade]

I fixed you up bud.View attachment 310825

Tanks meng! I thought about that after. Ill just edit my first post

 

[president]

I believe the 225 carb is the one you want.
I can double-check though

T1

 

[JohnnyBlade]

Heres some pics. New needle on left old on right. I do see a slight variation that i pointed out with the pic. The old shaft is a fuzz longer. Bit i had pressure problems with both so im ruling that out. Im gonna try and clean the seat and go from there. Thanks for the imput so far and i will keep u guys posted. View attachment 232026View attachment 232027View attachment 232029View attachment 232031

Poast edited: to add link for @JohnnyBlade because he couldn’t finger it out on his own. Sew I did it for him like I did his mom last night. Because I’m such a nice feller

*******************************************
https://tillotson.ie/kits-parts/carburetor-to-kit-cross-reference/
***************^***************************

FLMAO!!! I buzzed through the thread just for giggles and found out where ya put it right in the middle wer no one will find it hard to get good help around here

 

[Woodpecker]

FLMAO!!! I buzzed through the thread just for giggles and found out where ya put it right in the middle wer no one will find it hard to get good help around here

Thought it was pretty gooder for being in a tree at the time

 

[JohnnyBlade]

Thought it was pretty gooder for being in a tree at the time

Ok ill give ya 2 pts for being in a tree I got her moved to the top u covered the middle and i got the end now

Wer good! If peeps cant find their Tillotson carb kit now its on them!

 

[Woodslasher]

Bump for a Tilly question, what saw does a HS149B go on? I found it in a bin of 044/056/066 bits and I’m hoping it’ll work on an 066, but I can’t find what it belongs on.

 

[JohnnyBlade]

Bump for a Tilly question, what saw does a HS149B go on? I found it in a bin of 044/056/066 bits and I’m hoping it’ll work on an 066, but I can’t find what it belongs on.

Dont know but ill keep it at the top

 

[Woodslasher]

In case anyone is wondering, I found that a HS147 fits a P41 and the next closest models I've found fit Jobu and Roper saws, so I'm guessing it fits a similarly-aged model. I'm not seeing too many with a plastic fuel elbow like mine has, though.