Jon_C
Active OPE Member
- Local time
- 5:01 PM
- User ID
- 9395
- Joined
- May 5, 2019
- Messages
- 9
- Reaction score
- 8
- Location
- Thorne Bay AK
So I have been tinkering with the idea of taking a BB'ed 066 with popup piston and doing some more interesting modding.
1. An 070, 090 carb for saws 105cc+
2. A reed box and custom intake (No blow back and better fuel air mix with more pressure through the transfers)
3. Opening up the ports
4. Opening the transfers and making them have bolt on covers similar to the 372 x-torq (Not to sure about his one but the theory is to open the transfers past the limits of the jug)
5. Adjust timing and squish for optimal running
6. Porting the exhaust to compensate for the other mods also at some point even putting on a tune pipe
Just some random thoughts I have strung together reading other post and tinkering with my own saws. Looking for others thoughts on the ideas above. Also looking for other ideas and thing other may have already tried.
And finally do you think this might be going to far for sanity or safety?
1. An 070, 090 carb for saws 105cc+
2. A reed box and custom intake (No blow back and better fuel air mix with more pressure through the transfers)
3. Opening up the ports
4. Opening the transfers and making them have bolt on covers similar to the 372 x-torq (Not to sure about his one but the theory is to open the transfers past the limits of the jug)
5. Adjust timing and squish for optimal running
6. Porting the exhaust to compensate for the other mods also at some point even putting on a tune pipe
Just some random thoughts I have strung together reading other post and tinkering with my own saws. Looking for others thoughts on the ideas above. Also looking for other ideas and thing other may have already tried.
And finally do you think this might be going to far for sanity or safety?