The Swap Meet Thread

[usmcbuckwild]

Serviceable cylinder for a MS461?

And possibly a a fuel tank.

Ethics prevents me from using this on on a flip.

A little super glue and some duct tape; it’ll be fine!

 

[huskihl]

Serviceable cylinder for a MS461?

And possibly a a fuel tank.

Ethics prevents me from using this on on a flip.

I believe an ms460 tank also works, but you'll need to change the master control lever to the ms461

 

[countryhog]

Looking for parts for MS250. Used and serviceable are ok. Not trashed
Clutch cover
Bar adjuster
Bar studs and nuts
Bar
Chain
Chain guides
Clutch sprocket

 

[mikerudder]

Picked up a couple 066 parts saws.

Looking for parts:
Recoil
Plastics (top cover, AF base, AF cover)
Muffler
Flywheel (1312 coil, my research shows I need the poly flywheel?)
Handle bar
Carb

Have $$$, will buy a parts saw or individual parts
Have some trade stuff too! Will trade the other 066 carcass (no tank) towards some parts. Bearings feel nice and tight and spin freely.

 

[PogoInTheWoods]

Looking for a MS210, 230, or 250 EasyStart coil and possibly the flywheel also. Just put a FarmerTec 250 shortblock into a 210 and the timing is way off for some reason. Only difference in cranks should be the stroke of the 210. All use the same coil and f/w.

 

[beaglebriar]

Looking for a MS210, 230, or 250 EasyStart coil and possibly the flywheel also. Just put a FarmerTec 250 shortblock into a 210 and the timing is way off for some reason. Only difference in cranks should be the stroke of the 210. All use the same coil and f/w.

Wish I woulda known, passed up a 025 at the auction yesterday.

 

[PogoInTheWoods]

I shoulda said all the EasyStarts use the same coil and flywheel. Their coils have the timing way retarded for the easy start feature and they use a different flywheel as well.

 

[kkemp]

I'm looking for a Stihl 041 flywheel .1110 086 0505 part number . Thanks

 

[usmcbuckwild]

I'm looking for a Stihl 041 flywheel .1110 086 0505 part number . Thanks

Let me go through my big box of 041 crap. May have one for you.

 

[Lightning Performance]

I'm looking for a Stihl 041 flywheel .1110 086 0505 part number . Thanks

I have an early one on a carcass.

Wanted:
Possibly, dare I say it, a nice 084 top cover and clutch springs. Piston gets checked this week.

046 MS460
tank handle serviceable or not or both
Need carb studs and nuts
Air horn with the stud
plus another tank handle
These are beautifully mangled
One air filter base plate HD style

These can be got AM pretty cheap but why not ask
Filter cover with nut
Throttle linkage
Oil pump
Worm
Drum
Bearing
Washer
Clip

Serviceable will do

 

[Lightning Performance]

Serviceable cylinder for a MS461?

And possibly a a fuel tank.

Ethics prevents me from using this on on a flip.

Nothing prevents me from putting that on a toy or stripping it down for hardware. PM if you want to move it. Good Day. @67L36Driver

 

[usmcbuckwild]

I have an early one on a carcass.

Wanted:
Possibly, dare I say it, a nice 084 top cover and clutch springs. Piston gets checked this week.

046 MS460
tank handle serviceable or not or both
Need carb studs and nuts
Air horn with the stud
plus another tank handle
These are beautifully mangled
One air filter base plate HD style

These can be got AM pretty cheap but why not ask
Filter cover with nut
Throttle linkage
Oil pump
Worm
Drum
Bearing
Washer
Clip

Serviceable will do

I have the 046/460 air horn with stud, filter base for HD filter, might have the carb studs as well. MIGHT have the throttle linkage, oil pump, work, drum, bearing, washer and clip. I’ll look in the morning as it is all boxed up on the trailer.

 

[Lightning Performance]

Nice. Thought that stuff would be gone after your road trip. EAE GTG was cool hu?
@usmcbuckwild

 

[psuiewalsh]

How long are 460 studs?

 

[PogoInTheWoods]

Don't have one handy to measure but they're exclusive to the 046/460.

 

[Canadian farm boy]

How long are 460 studs?View attachment 180703

Those look like the right ones.
I just checked one that I’m positive is for a ms460 and it measured just under 9 cm.

 

[psuiewalsh]

Aftermarket Stihl 046 MS460 Carburetor Bolt Collar Screw 86mm OEM 1128 122 6603

 

[usmcbuckwild]

Nice. Thought that stuff would be gone after your road trip. EAE GTG was cool hu?
@usmcbuckwild

It was an awesome trip! My first GTG and got to meet some great folks. I made it known I had parts and were letting them go for cheap. Bunch of guys made off with good deals. But, not everything got snatched up. I know I saw the airhorn and the baseplate when I was sorting the 200T parts. Pretty sure there is another 460 carcass mixed in there, will know for sure tomorrow.

 

[kfd518]

Looking for a 2100 filter cover old damaged faded and even cracked is fine with me. It’s probably going to get cut anyways.
No beauty queens!
Trying to build something up to put a 288HD filter under or at least in front of on a 2100 and keep it from getting smashed to smithereens.

 

[SOS Ridgerider]

Hey guys.

I’m looking for a chain tensioner screw for my Solo 603.
The same screw was used on the 670, 680, 690 and 603. I’m pretty sure it was used on the 662 and 667 as well, if someone has a parts saw somewhere.
The original part number from Solo was 00 18 261
Measurements are 6 x 53mm.
I don’t need new, just working. Last weekend at the CT GTG I noticed the backend of the screw was broken off. I’ll take the little tensioner nub too, if possible, but it’s not crucial.
Don’t have much to trade other than green government pieces of paper.