DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[Wilhelm]

OEM NOS 52mm PS-7900 P&C kit

CORRECTION/Edit:
This is a as new takeoff 47mm PS-6400 P&C kit.
My apologies for the misinformation, I thought it is the 52mm I have "somewhere" (I'll find it, but not tonight)!

Marked with Dolmar logo on one side and "MAHLE" brand on the other.

 

[Wilhelm]

AM "black" no markings 54mm P&C kit





Someone is pulling a fast one selling AM as OEM!

 

[Wilhelm]

 

[ray benson]

OEM NOS 52mm PS-7900 P&C kit
Marked with Dolmar logo on one side and "MAHLE" brand on the other.

View attachment 451367
View attachment 451368

Is that number 477D09 ? If so I will add it to a cylinder number file.

 

[Wilhelm]

Is that number 477D09 ? If so I will add it to a cylinder number file.

47 ZD 09

And, ups my bad!
This is a takeoff 47mm PS-6400 P&C kit with DeCo valve hole drilled and tapped.



Where TF is my 52mm kit?!

 

[Shane¹]

To be fair @ErnieG picked up this cylinder super cheap knowing it probably was am. Also seller probably had an idea it was not OEM or he would have asked oem price for it

 

[Wilhelm]

To be fair @ErnieG picked up this cylinder super cheap knowing it probably was am. Also seller probably had an idea it was not OEM or he would have asked oem price for it

If the kit was priced correctly for an AM no harm done.

I bought one not ever wanting to have to utilize it!

 

[ErnieG]

To be fair @ErnieG picked up this cylinder super cheap knowing it probably was am. Also seller probably had an idea it was not OEM or he would have asked oem price for it

Yes I did get it cheap and I was certain it was an aftermarket but was hoping I was wrong but I'm think not .
Seller never mentioned anything in the listing about it being an AM and I even sent a message and asked but never got a reply yet and it was shipped...so we'll see what happens when it arrives .
Maybe I'll have to open a claim if I don't get a reply to my message!

Ernie

 

[heimannm]

Wilhelm - I can send you my address for shipment of that watch, it would be a nice addition to the display materials here...

Mark

 

[Wilhelm]

Wilhelm - I can send you my address for shipment of that watch, it would be a nice addition to the display materials here...

Mark

There is one already in the US!
The Earth will tip out of ballance if I ship this one over the pond too.

 

[Wilhelm]

@ray benson

OEM NOS Dolmar PS-7900 52mm P&C kit with LH side DeCo valve hole drilled and tapped.

Dolmar part number: 038.130.031

 

[Shane¹]

A little muffler mod action I don't like trying to get the flange back in there 2 6mm nuts works nice

 

[Shane¹]

Also for you dolmar fans. Broken 7900 oil gear makes a pretty good replacement oil gear for a 460.

 

[ray benson]

@ray benson

OEM NOS Dolmar PS-7900 52mm P&C kit with LH side DeCo valve hole drilled and tapped.

Dolmar part number: 038.130.031

View attachment 451592
View attachment 451593
View attachment 451594

Thank You.

 

[ErnieG]

Cylinder showed up yesterday and it's definitely AM but doesn't seem to bad and it's 54mm .
I'm gonna put this on the shelf for later project
Ernie