DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[RI Chevy]

This is unreal. I made many cuts limbing this big oak with the bar buried and WOT. The smell was a little different than I was used to, but saw performed flawlessly.
This stuff is a good product.
I'm going to get some.

 

[dahmer]

This is unreal. I made many cuts limbing this big oak with the bar buried and WOT. The smell was a little different than I was used to, but saw performed flawlessly.
This stuff is a good product.
I'm going to get some.

I must have missed it, what is this “miracle” product?

 

[Wilhelm]

To my understanding they use some sort of fuel conditioner and leave the 2-stroke oil out.
Dunno what's up with that either, some kinda field testing.

I'll take a 73xx to test this stuff please.
I have a 36" bar and large diameter oak logs to give this testing a real go.
I can also not sharpen the chain so that the saw works harder.

 

[RI Chevy]

http://microtechlubes.com/2019/index.php?page=gasolineconditioner

@dahmer

@166

 

[dahmer]

To my understanding they use some sort of fuel conditioner and leave the 2-stroke oil out.
Dunno what's up with that either, some kinda field testing.

I'll take a 73xx to test this stuff please.
I have a 36" bar and large diameter oak logs to give this testing a real go.
I can also not sharpen the chain so that the saw works harder.

So nice to have friends willing to help!!!!

 

[dahmer]

http://microtechlubes.com/2019/index.php?page=gasolineconditioner

@166

Interesting, but I’ll withhold a commitment until further testing is done. Plus I have a case of Red Armor.

 

[Wilhelm]

So nice to have friends willing to help!!!!

I have a hard time finding them . . .

 

[Wilhelm]

Interesting, but I’ll withhold a commitment until further testing is done. Plus I have a case of Red Armor.

I have a box full of Makita 2-stroke oil that should keep me busy for a couple years.

 

[RI Chevy]

I plan on trying this additive along with the 2 stroke oil.
Best of both worlds.
On can never have enough lubrication...

 

[166]

This is just an experiment with this fuel conditioner. If the saw blows up I'm not worried about it. So don't try this in your saw unless you're willing to take the risk.

The PS-420 that @RI Chevy ran is a saw I let @SOS Ridgerider borrow for testing.

This is just a shop beater saw. It had a tank or two ran through it a couple years ago. Then last summer I tried the same setup.

 

[166]

Oh and don't pay attention to the recoil decal. Swapped that to mess with someone one day.

 

[RI Chevy]

This is a cool test Steve. Thanks for doing this.
Just a side note, I bought a Stihl MS271 from a dealership near me last year. They sold the saw to a guy. He brought saw back 1 hour later. He straight-gassed the first full tank and piston and cylinder were toast. Just 1 tank.

So the fact that this saw is running well and the insides look brand new is a testament to this product. What better way to really test and back a product. [emoji106]

 

[166]

http://microtechlubes.com/2019/index.php?page=gasolineconditioner

@dahmer

@166

That's the stuff

Sent from my LG-US998 using Tapatalk

 

[Wood Chopper]

Oh and don't pay attention to the recoil decal. Swapped that to mess with someone one day.

You Would never do such a thing


Sent from my iPhone using Tapatalk

 

[SOS Ridgerider]

You Would never do such a thing


Sent from my iPhone using Tapatalk

Never!!

 

[Fishnuts2]

I've used conditioner in my fuel for years. It keeps the motor from seizing, and the fuel from going stale for a longer period of time. I add it at the rate of 32 - 1.

Amsoil Saber

 

[RI Chevy]

What conditioner? This BestLine product or a different brand?

I have been using Stabil and other brand fuel stabilizers for years. But they don't seem to have any lubricant in it like this BestLine stuff.

 

[qurotro]

Hm... Brand new.

With a bit bad paint job...

 

[Simondo]

Hm... Brand new.
View attachment 227014
With a bit bad paint job...
View attachment 227015

New Old Stock ??

 

[qurotro]

New Old Stock ??

Yup... She's born in 2006