DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[old_sir_henry]

Good idea, WeTransfer had slipped my mind...

 

[Wilhelm]

Anyone ever try .325" on a 9010?

I did today, hauls a$$ and is extremely smooth.
24" bar buried in a gnarly turkey oak log, 9T sprocket.
Very nice chips too.

 

[old_sir_henry]

A "girly chain" on a 9010? Weird...

 

[Wilhelm]

It's for science and stuff!
Then again maybe I had a couple beers over my limit.

I am trying to source a .404" in .058" locally, already have .325"/9T & 3/8"/8T for my 9010 hard nose bar, both Stihl RS.

 

[old_sir_henry]

Then again maybe I had a couple beers over my limit.

Common cause for a lot of griefs, but who am I to ...

 

[Dub11]

Anyone ever try .325" on a 9010?

I did today, hauls a$$ and is extremely smooth.
24" bar buried in a gnarly turkey oak log, 9T sprocket.
Very nice chips too.

I got a .325 10t and some square grind I wanna try on a big saw one day.

Sounds fun lol.

 

[Wilhelm]

I got a .325 10t and some square grind I wanna try on a big saw one day.

Sounds fun lol.

Do it!

I have no square, but brand new .325" Stihl RS with 9T sprocket is self feeding nicely in hard knotty turkey oak.

To me .325" 9T felt smoother and faster than 3/8" 8T, both new off the roll Stihl RS in the same log, on the same saw & bar.
.325" 9T held higher in cut rpm's too.

 

[Dub11]

Do it!

I have no square, but brand new .325" Stihl RS with 9T sprocket is self feeding nicely in hard knotty turkey oak.

To me .325" 9T felt smoother and faster than 3/8" 8T, both new off the roll Stihl RS in the same log, on the same saw & bar.
.325" 9T held higher in cut rpm's too.

Have you sharpened the 325 yet?

 

[Wilhelm]

Nope, was brand new off the roll factory grind.
Has clocked 4 bucking cuts in large knotty turkey oak.

Same deal on the 3/8" Stihl RS I have.

 

[fossil]

Looking for opinions on the 120 super. One is coming up for sale.



Thanks.

 

[dahmer]

Dolkita collectors.

 

[dahmer]

If any of you Dolkita collectors across the pond want this I can help you out.

 

[RI Chevy]

Who makes this bar?
What mount?

 

[dahmer]

Who makes this bar?
What mount?

All the info given.

 

[RI Chevy]

TY Sir

 

[old_sir_henry]

Looking for opinions on the 120 super. One is coming up for sale.

Strong & reliable and pretty old school. not exactly light weight.
It as an additional manual fuel pump on the back of the tank, left side to the rear handle,
which looks a bit like a modern primer but a little larger and works by injecting fule directly
into the intake funnel.
You should look if this part is present since it might be a bit difficult to find.

 

[old_sir_henry]

Who makes this bar?
What mount?

If slot is 8,2 mm then the mount apparently is A041, and probably is made by Oregon like
all the Dolmar bars.
Would be funny to have on a SACHS-DOLAMR 101 hobby, where despite the claim
on the bar neither bar nor saw is made in germany.

 

[cuttinscott]

Who makes this bar?
What mount?

It's a 15" for the 112-119 age saws used a 56 driver chain more than likely made by sandvik

 

[RI Chevy]

TY guys.
Not a K095 mount?

 

[Wilhelm]

TY guys.
Not a K095 mount?

Just get the bar and convert it to whatever mount You need it to be.