POULAN The Official Poulan Thread

[old 040]

Added this classic to the stable!........

 

[astnmacgto]

Added this classic to the stable!........View attachment 66748 View attachment 66749

Digging the high top

 

[Cut4fun]

You pull out both baffles and the screen or just one?

Sent from my SM-G550T using Tapatalk

From what I remember I was pulling all of it. Just a hollow muffler when I was done.

 

[S Sidwell]

From what I remember I was pulling all of it. Just a hollow muffler when I was done.

You was brave to stand all that noise.

Sent from my SM-G550T using Tapatalk

 

[Cut4fun]

You was brave to stand all that noise.

Sent from my SM-G550T using Tapatalk

No longer though.
I even pulled my modded muffler off my 505 and put a stock one back on. IMO who in their right mind want to listen to all that noise cutting all day.
You would have to wear ear plugs.

 

[Otter]

Ok this a silly question but here goes

Has anyone ever ported 2000 wish it had more poop

 

[T.Roller]

I know this is out of place but could someone give me some info on this saw. It's local but I know nothing about them other then it's a 95 cc gear drive

 

[Cut4fun]

Put a poulan 3500 60cc together and set up as requested.
Always loved these little saws as they are size weight close to a 50cc but 60cc.
Dual port muffler I started doing on these instead of both on the sides. 1 in front middle and 1 oem side exit. Baffle drilled open and spark screen removed. 325 7T with 18" set up.

The bar mount shots were showing taking the K095 bar and making it work on K041 saws. A few minutes on each side and good to go.

 

[Mark71gtx]

Any of you Poulan hoarders have the top handle and brace for a 245A equipped with a bow?

 

[countryhog]

poulan 245A with b/c in a box. Says everything is there and it fires with prime. Havent seen it yet. Under what conditions would this be worth $50?

 

[S Sidwell]

Got a 4200 and a 5200, going to build one out of both, will be a 5200 when done. The 5200 has a busted case at a mount and the fuel tank has white death with a large hole eaten through it. Will be using the best parts on the build.

Steve, Samsung On5 using Tapatalk

 

[S Sidwell]

poulan 245A with b/c in a box. Says everything is there and it fires with prime. Havent seen it yet. Under what conditions would this be worth $50?

Like Acornhill said, get it.

Steve, Samsung On5 using Tapatalk

 

[ranchdadmike]

Can you guys ID this poulan bow saw?


Sent from my iPhone using Tapatalk

 

[rocketnorton]

ask for good pic of tag on top. i'd just go look if it were here.

 

[rocketnorton]

mark on as may know

 

[ranchdadmike]

ask for good pic of tag on top. i'd just go look if it were here.

Couple hour drive for me...I requested a more detailed pic. Wondering if it's worth my time/$?


Sent from my iPhone using Tapatalk

 

[rocketnorton]

don't see bows or s/c poulans here. a member sent me this, knowin I was wantin.

71a. it runs/cuts.

 

[FergusonTO35]

View attachment 68718 I know this is out of place but could someone give me some info on this saw. It's local but I know nothing about them other then it's a 95 cc gear drive

All I can tell you is, my grandfather had one and was still using it in the early 1980's. It was heavy, loud, and would cut through anything. He eventually had to retire it due to back problems and went almost completely in the opposite direction with a Craftsman version of the Poulan Micro.

 

[RocketRoss57]

Got the 3000 set up a little differently now days. Disregard the chain in the photo... There's real chain on it now.

 

[S Sidwell]

Like that big starter handle, may do my 5200 just for the heck of it when I get her back together.

Steve, Samsung On5 using Tapatalk