POULAN The Official Poulan Thread

[Dub11]

Nice finds @Mycamaro_68 Both of those are great saws. The 3.7 60cc is only like the 7-8 one I have seen to date.

3.7 Saving them all to their own thread as they are the rarer of the series. http://chainsawrepair.createaforum.com/poulan/craftsman-3-7-60cc-24'/

The blue labeled 54cc is top notch chrome bore poulan 335 predator. Thread on them. http://chainsawrepair.createaforum.com/poulan/craftsman-3-3-sears-best/

Have had 2 of the 3.7's myself. 1 sold to collector. 1 left I will sell with the original 24" too.

View attachment 139237 View attachment 139238 View attachment 139239

Is that 3.7 the same as the PP 365?

 

[Cut4fun]

Make that above to his being only #7

 

[Cut4fun]

Is that 3.7 the same as the PP 365?

Yes

3500 365 3.7

 

[Cut4fun]

Matter fact I have a group of all 3 again setting waiting on me to do piston kits in them.

 

[S Sidwell]

NIB Poulan 330, saw it on CL.
https://greenville.craigslist.org/grd/d/new-poulan-pro-model-330/6679545645.html

Steve, Samsung On5 using Tapatalk

 

[Cut4fun]

1 owner poulan 5400 I just got. Original owner said just been setting for at least 10 years and was bought back when they burned wood and had to cut up a big oak on the ole farm place.
I didnt even try to start it. Just pulled it over. Not going to keep as not series of big poulans I run.

you can tell been raining all day.

 

[heimannm]

Run it as it was intended, you may decide you will keep it.


Mark

 

[Cut4fun]

Run it as it was intended, you may decide you will keep it.

View attachment 142816
Mark

Not me Mark. Just not the series I run.

I sold this 8500 too.

 

[S Sidwell]

Would look nice in you chainsaw museum.

Steve, Samsung On5 using Tapatalk

 

[Cut4fun]

Something I noticed. Like this ribbed handle grip way better then the foam one that was on the 8500.

Finished testing with the 28" that came with it buried in dry ash log. I'm done with it and happy with results.

Pretty much sold SPF elsewhere. Had like 6 folks wanting to buy and 2 wanting to trade saws for it too.

 

[Mycamaro_68]

I picked up another one for $25. Guy said it didn't run. Poured out the varnish that was in the tank and with fresh mix it was running with 8 pulls.

 

[Dub11]

I picked up another one for $25. Guy said it didn't run. Poured out the varnish that was in the tank and with fresh mix it was running with 8 pulls. View attachment 143048 View attachment 143049

I'll give ya $50 for it

 

[Mycamaro_68]

I'll give ya $50 for it

I was planning on flipping it but my CAD is flairing up again, I may end up keeping it

 

[Dub11]

I was planning on flipping it but my CAD is flairing up again, I may end up keeping it

Meh what is this CAD you speak of?

 

[Mycamaro_68]

Meh what is this CAD you speak of?

If I get myself talked in to selling it I will let you know

 

[Cut4fun]

Poulan 5400 85cc, Poulan 505 83cc. I never compared the 8500 when I had it on hand last year for size and weight. I just knew it was heavier then I like now days. So this time after getting 5400 ready to ship I did the same to the 505. Drained of fluids and aired off under covers etc. Both bar plates inner outer and clutch covers with both bar nuts for PHO weights.
.2 = 3.2ounces and .8 = 12.8ounces

I sold one of my 505 to a guy on my website a few years ago. He weighed it one time and good to see my scale I use for myself is within 2.8ounces of his saw weighing scale. Could be just the matter of crud and left over bar oil etc. = I noticed me and Rogers PP505 weights posted here are within 2.8ounces of each other. = Good enough for me. Mine 15lb 12.8oz and his 15lb 10oz

 

[Stubnail67]

I picked up another one for $25. Guy said it didn't run. Poured out the varnish that was in the tank and with fresh mix it was running with 8 pulls. View attachment 143048 View attachment 143049

i do 75

 

[Dub11]

i do 75

Just shoot me down while dont ya lol.

 

[Stubnail67]

thats a clean looking saw....was an older 3300 listed here but kinda beat up and a long haul....

 

[Dub11]

thats a clean looking saw....was an older 3300 listed here but kinda beat up and a long haul....

Did you see the 3.3 for sale here on the forum?