The Official Craigslist & eBay Thread

[Bill G]

It could be time to bargain.

I have a hunch he will not bargain.

 

[oddsawz]

STIHL MS200 CHAINSAW NEW IN BOX | eBay

Stihl MS200 Chainsaw. Item is new in the box and was only taken out for pictures. The saw has never had fuel or oil added. It was sold new in 2005. It only includes what is shown in the pictures. No warranty expressed or implied by seller or manufacturer. No returns allowed.

www.ebay.com

 

[Bill G]

It would not surprise me if that sells.

 

[Sloughfoot]

Anything special about this one? It's tempting me.

Chainsaw - farm & garden - by owner - sale - craigslist

This saw was gone through at our local sthil chainsaw shop. New carburetor! An old tried and true saw with plenty of power. It is the pro saw of its time. They made two different sized saws of this...

chico.craigslist.org

 

[hacskaroly]

Anything special about this one? It's tempting me.

Between the 038 and 038 special, I would take the special. It has a larger piston and more power. I had a coworker that both saws and I liked the 038 Super better. Good saw, good power, not bad to work on. I ended up having to split the case on the 038 Super to replace the bearings and was a quick and easy process. My coworker was using 28" bars on the saw and that made them a little front heavy, if using a lot, I would probably put a 24" bar on it. Parts are still plentiful.

 

[Sloughfoot]

Between the 038 and 038 special, I would take the special. It has a larger piston and more power. I had a coworker that both saws and I liked the 038 Super better. Good saw, good power, not bad to work on. I ended up having to split the case on the 038 Super to replace the bearings and was a quick and easy process. My coworker was using 28" bars on the saw and that made them a little front heavy, if using a lot, I would probably put a 24" bar on it. Parts are still plentiful.

This one's an 034 Super. 61ish CC. There much difference in it and the 038 Special, other than 10 CC? I'd probably port it so it'd handle a 24" bar. That'd justify spending the big bucks to replace the 24" on my ported 044 with a 28".

 

[hacskaroly]

his one's an 034 Super. 61ish CC.

Shoot...yeah, I overlooked that small detail. I think the 034/034 Super situation will be similar, the super is a little larger piston and a bit more cc, probably puts it up closer to an 036. I don't think the 034 will have an issue with a 24" even without porting. An 026 will handle a 20" bar so jumping to an 034 should handle the 24 with no issues.

 

[Sloughfoot]

Shoot...yeah, I overlooked that small detail. I think the 034/034 Super situation will be similar, the super is a little larger piston and a bit more cc, probably puts it up closer to an 036. I don't think the 034 will have an issue with a 24" even without porting. An 026 will handle a 20" bar so jumping to an 034 should handle the 24 with no issues.

That's kind of what I've found. Supposedly Stihl went to a "better" cylinder design on the Super. Larger intake and maybe other stuff. Same cylinder as the 036 if I'm not mistaken. I like the Stihls from this era.

 

[farminkarman]

If anyone is looking for a 394xp jug, how about 3 of them? https://www.ebay.com/itm/1873751711...TE5Mj0GfutoqYIgquBnh9u9VY=|tkp:Bk9SR9zBzO-OZg

 

[oddsawz]

You can wake board with this one

Pardon Our Interruption...

 

[oddsawz]

Ms200 in the UK

Stihl MS 200 Petrol Chainsaw - MS200 | eBay

STIHL MS 200 Petrol Top Handle Chainsaw in perfect working order. Condition is used. (No chain no bar) Starts and runs perfectly . Ready for work. Please inspect photos as they form part of my description,So check the pictures very well before bidding on the item.what you see in the pictures is...

ebay.us

 

[cus_deluxe]

scored this sweet drill press and stand on craigslist, dude threw in a bunch of big drill bits, most are chicago-latrobe, good usa made stuff. tiny bit of play in spindle so ill probably have a little work to get it nice and tight but for $100 i think i scored.

 

[hacskaroly]

scored this sweet drill press and stand on craigslist, dude threw in a bunch of big drill bits, most are chicago-latrobe, good usa made stuff. tiny bit of play in spindle so ill probably have a little work to get it nice and tight but for $100 i think i scored.

The thing is missing a knob on one of the handles, that makes it a piece of junk, I can take it off of your hands if you want...

 

[cus_deluxe]

The thing is missing a knob on one of the handles, that makes it a piece of junk, I can take it off of your hands if you want...

thepic makes it look mint, but its well used. somebody gave it a rattle can paint job at some point, the handles are all buggered up, one of em is just a threaded rod welded in there . the bummer is the damage to the table, but just cosmetic ultimately.

 

[SimonHS]

thepic makes it look mint, but its well used. somebody gave it a rattle can paint job at some point, the handles are all buggered up, one of em is just a threaded rod welded in there . the bummer is the damage to the table, but just cosmetic ultimately.

A good table might turn up, if you are patient.

 

[Ketchup]

thepic makes it look mint, but its well used. somebody gave it a rattle can paint job at some point, the handles are all buggered up, one of em is just a threaded rod welded in there . the bummer is the damage to the table, but just

It’s like a truck with a dented bed. Just broken in. The bits alone were worth the price. Having the stand on wheels will be nice.

 

[cus_deluxe]

A good table might turn up, if you are patient.

yep im gonna keep my eyes out for one. had the thought of just making one out of a 12” faceplate but id end up with more into that than the whole thing to begin with lol.