The giveaway thread 20/21/22/23/24/25

[tickbitintn]

Unfortunately most of us here have done something similar.
[emoji52]


Sent from my XT1635-01 using Tapatalk

 

[cuinrearview]

@jacob j. plugs are on their way. Sorry been busy.

 

[tickbitintn]

@jacob j. plugs are on their way. Sorry been busy.

They should make it by x-mas!!
[emoji23]
Lol

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

I gotta find something else to throw up on here. I'm mostly a vintage saw guy. Hmm

So you need this then??

Sent from my XT1635-01 using Tapatalk

 

[Steve]

Damnit! It run?

It has a brake, you don't want that!

 

[tickbitintn]

So this was given to me about 13yrs ago when I mentioned to a co-worker that I needed a chainsaw.....
I went through the fuel system and carb, found a new 1/4" chain for it and used it a few times.
It was the second saw I had ever touched. First one was some clapped out crapsmen special.
I had some trees fall so I stepped up to a 455 rancher. First saw I ever purchased.
Best saw ever.
Then my brother dropped a clapped out 385 that didn't run right onto me to get "running right".... I found chainsaw forums....

Dozens of saws later the mighty sp40 had its place in the corner.
One day I noticed a wet spot under it, premix had begun to seep from it.
I tore it down and replaced the fuel line.
Sprayed some storage oil in the carb inlet, after reassembly, held the throttle open and pulled it over a few times....
And here it is..... Still...

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

It has a brake, you don't want that!

SSSSHHHH your mouth!!!

Lol

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

You guys gave me a good chuckle. [emoji16]
Thanks!! Needed that this evening.

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

The 385 came back to me after a bottom end failure years later.
Full rebuild, base and squish cut, some port work and a healthy muffler adjustment.
It is probably the last saw I would ever part with.

Sent from my XT1635-01 using Tapatalk

 

[Steve]

This is starting to look like the send all your stuff to egg shooters house thread. Thanks Tim for dropping the link.

You are taking all the mini macs. Who is gonna stop you?

 

[David Young]

Did this last week just moving a saw over on shelf....
Sold that *b-wordass saw today!
Lol

Sent from my XT1635-01 using Tapatalk

That’ll teach you to make the chain sharp.

 

[brandonstclair20]

Following


Sent from my iPhone using Tapatalk

 

[ucm931]

Can't ship ammo...

Wut? Since when? I just got 500 rounds of 22lr through UPS the other day. Have gotten a chitload of ammo shipped over the years. USPS won't do it, but pretty much everyone else does.

 

[ucm931]

Can't ship ammo...

Amost forgot.......DIBS!!!!!

 

[tickbitintn]

That’ll teach you to make the chain sharp.

Well it was attached to a mighty 137 hooskie.....
Them are sum cuttin machines.....
And stuffs......
[emoji6]

Sent from my XT1635-01 using Tapatalk

 

[cuinrearview]

The 385 came back to me after a bottom end failure years later.
Full rebuild, base and squish cut, some port work and a healthy muffler adjustment.
It is probably the last saw I would ever part with.

Sent from my XT1635-01 using Tapatalk

Dibs!

 

[jacob j.]

Ok fellers. I scratched around and found stuffs..

Brass catcher fir an AR15, universal pistol holster that housed a Smith M&P 9. Two sets of UTG rings, 1" tube. One set is for a picatinny rail the other for narrow 22 rifle groved receiver or mount, 30mm scope level and a never carried original Schrade Copenhagen snuff commemorative pocket knife. Factory edge still on it. Free shipping lower 48. View attachment 267824

I can use the scope rings for the narrow .22 style mount - I have a Redfield scope to put on my 10/22 project.

 

[ucm931]

I believe person to person is a big naw naw. Like me to you type deal.

Nope, no issues person to person. Only restrictions are size, quantity, ground ship only, and might need some extra hazmat labeling. Doesn't even cost extra to ship.

https://www.ups.com/us/en/help-cent.../hazardous-materials/shipping-ammunition.page

 

[full chizel]

Well I'll be.....FankU for setting me straight. You best be on the lookout if I decide to share some my munitions.

As you know I’m looking for a scope if you’re really feeling the holiday spirit

 

[Steve]

Got a few saws ill post here tonight. Hope someone can use.