NPKenny
Super OPE Member
- Local time
- 7:30 AM
- User ID
- 5030
- Joined
- Jan 12, 2018
- Messages
- 292
- Reaction score
- 743
- Location
- Lehi, AZ
The 066 is an early model with an aluminum flywheel. The coil is delaminating and I have these 461 take-off coils I bought just for this.
Now I am figuring out the best way to mount the Stihl 461 coil. It looks like the top hole in the coil is the reference to maintain timing.
All three bolt holes are available, but 1-1/2 line-up. Do I open the top and bottom hole? Align the top hole and grind exclusively on the bottom? Do I need to align the top and pin the back hole?
Now I am figuring out the best way to mount the Stihl 461 coil. It looks like the top hole in the coil is the reference to maintain timing.
All three bolt holes are available, but 1-1/2 line-up. Do I open the top and bottom hole? Align the top hole and grind exclusively on the bottom? Do I need to align the top and pin the back hole?
