SOLO Solo thread

[ray benson]

looking for ipl solo 650AV?

@ray benson

Sent the ipl to Piotr on AS this afternoon. Is that OK?

 

[Partner]

Ray is irreplaceable This is the second time he is helping me

 

[ray benson]

Ray is irreplaceable This is the second time he is helping me

IPL came from WMV-Dresden in Germany. Might be a spare parts source for you.

 

[Partner]

for good morning, there are no screws in the H&L carburetor / Mike gives the tiltson carburettor and the wolbro ws12 forum is trying to get to him

 

[Partner]

ok, I got to the carburetor and I got out with Walbro WS2, does anyone know if the H&L screws fit with another WS?

 

[Partner]

Ok, I stole the screws from ws10 ;-) I flew the fuel line and if there is a spark, I will try to fire it

 

[Partner]

the saw works but only in emergency mode with a fully closed throttle and the L screw in the gas tube unscrewed / air leakage / sealants are metric? solo 650av

 

[Partner]

solo 620av has the letter U on the cylinder by the spark plug and solo 650av has the letters CI / who should check

 

[Partner]

sealants are good / broken there was a carburetor mounting thread on one screw now works well I have to reduce the chain and see if the oil is running

 

[Partner]

The sealant on the flywheel side has dimensions 25x15x5 mm

 

[Partner]

The guide was hanging on the wall for over 10 years, someone drank the middle 12mm and I drilled the oil hole right through and it fits well. The tuple is but for the tests it will have to be enough for now. I unscrewed the spur

 

[Partner]

How to clean the air filter in solo 650av is it felt?

 

[old_sir_henry]

Clean it in warm water with textile washing powder.
Make sure the filter is completely dried before reusing.

 

[Partner]

I have 0.35mm on the ignition interrupter, is it acceptable in this model?

 

[old_sir_henry]

Between the points or between flywheel and magnet shoes?

 

[Partner]

between points

 

[old_sir_henry]

Should be OK then.

 

[Partner]

thread the two holes in the M5 mm flywheel and do not pull too hard and simultaneously tap the short fan fins on both sides with a soft hammer

 

[old_sir_henry]

Had another 60126 oldtimer given to me for free:







appears to be in quite good shape even the badge on the blue hood is in place.
Will still need some care and attention. The donor says, fuel line inside the tank is rotten...

 

[Partner]

Had another 60126 oldtimer given to me for free:

View attachment 329954

View attachment 329955

View attachment 329956

appears to be in quite good shape even the badge on the blue hood is in place.
Will still need some care and attention. The donor says, fuel line inside the tank is rotten...

bigger brother or smaller sister ;-)?