SHOW ME YOUR AXES

[ammoaddict]

Council tool makes some really nice axe heads I don't have one of their doubles as I have a few older nice double bits but I have 2 of their 5# single bits one on a whisky river 30c and the other on the factory handle and also a 6# and an 8# fire axe made by them.

I didn't even know of council until I found that orange axe in daddy's old building and found out from you guys that it was a council made in NC so then I started reading about them. Interesting story, still family owned since 1886. I've never really been an axe guy, just used one when I had to. I've recently gotten in to learning about the different patterns and when they originated. When I saw that phantom bevel double bit michigan I knew i had to have it. I was also looking at that 6 lb fire axe or forcible entry as they call it. I was wondering if it would be a good splitting axe or would a maul be better.

 

[chiselbit]

I didn't even know of council until I found that orange axe in daddy's old building and found out from you guys that it was a council made in NC so then I started reading about them. Interesting story, still family owned since 1886. I've never really been an axe guy, just used one when I had to. I've recently gotten in to learning about the different patterns and when they originated. When I saw that phantom bevel double bit michigan I knew i had to have it. I was also looking at that 6 lb fire axe or forcible entry as they call it. I was wondering if it would be a good splitting axe or would a maul be better.

@davidwyby

 

[davidwyby]

I didn't even know of council until I found that orange axe in daddy's old building and found out from you guys that it was a council made in NC so then I started reading about them. Interesting story, still family owned since 1886. I've never really been an axe guy, just used one when I had to. I've recently gotten in to learning about the different patterns and when they originated. When I saw that phantom bevel double bit michigan I knew i had to have it. I was also looking at that 6 lb fire axe or forcible entry as they call it. I was wondering if it would be a good splitting axe or would a maul be better.

What are you splitting?

Funny this splitter and codominant tree comes up at the same time @chiselbit

Council is my first choice - USA made and not $$$.

I like a curved handle for splitting. The 7 will split more better than the fire axe 6. I’d run the 6 unless what I was splitting was tough.

 

[davidwyby]

**the handle on my No 7 broke, I can’t remember if it was a fluke or I broke it or what. One of several heads I need to rehang.

 

[ammoaddict]

What are you splitting?

Funny this splitter and codominant tree comes up at the same time @chiselbit

Council is my first choice - USA made and not $$$.

I like a curved handle for splitting. The 7 will split more better than the fire axe 6. I’d run the 6 unless what I was splitting was tough.

Actually I don't split much at all as I'm getting older and more arthritis affecting my strength and mobility. I just start reading and wanting stuff that I don't really need. My mind says I want a 7 lb maul but my body won't be able to handle it. I figure 5 lbs would be about all i could handle. The Wood we have here is mostly maple, yellow pine, poplar, red and white oak. The majority of it is hard to split with a 3.5 lb jersey axe which is what I have. I've heard good things about the fiskars x27 and just wondering how they compared to the council 5 lb splitting axe.

 

[davidwyby]

Actually I don't split much at all as I'm getting older and more arthritis affecting my strength and mobility. I just start reading and wanting stuff that I don't really need. My mind says I want a 7 lb maul but my body won't be able to handle it. I figure 5 lbs would be about all i could handle. The Wood we have here is mostly maple, yellow pine, poplar, red and white oak. The majority of it is hard to split with a 3.5 lb jersey axe which is what I have. I've heard good things about the fiskars x27 and just wondering how they compared to the council 5 lb splitting axe.

Get the council!

 

[davidwyby]

Actually, if you want a council splitter, I have one. I have their wedge banger and splitter which are the same head, just long handle on the splitter.

 

[ammoaddict]

Actually, if you want a council splitter, I have one

Ok. How much you need for it?

 

[davidwyby]

Ok. How much you need for it?

Well, you want it with or without a handle? Cuz somebody broke it. They come with a straight handle but I'd go curved.

 

[ammoaddict]

Well, you want it with or without a handle? Cuz somebody broke it. They come with a straight handle but I'd go curved.

Well after some thinking, I'm having wrist surgery next month and I'll be out of work for 3 months so I probably shouldn't be spending unnecessary money right now and I won't be able to use it anyway. If you still have it after that time maybe we can work something out.

 

[Squareground3691]

 

[FTG-05]

I have the same gauge from Wiseman. Picked it up the same day I picked these two up:

 

[davidwyby]

 

[nbbt]

Picked up this ax head a couple of days ago. It does not appear to have been used yet.
Does not look to have had a handle attached yet either.


I'm calling it a barn find.

 

[two4spooky]

I have the same gauge from Wiseman. Picked it up the same day I picked these two up:

View attachment 466762

Same gauge here. And Wisemen Trading has been great to deal with. Really good company. Never saw the kittens there though. Will have to pay better attention next time.