Shop Tip- Husky mounts for Dolmar

[Spike60]

Dolmar guys may already know this, but I'll share this info for anyone who doesn't.

Had a nice Dolmar 114, that needed some mounts. Didn't actually check, but I'm pretty sure they are NLA. Looking at them, I thought some Husky 61/272 mounts might be close enough to work. Sure enough, the Husky mounts are a perfect fit. A 114 is a metal tank saw, so I had to use 162SE mounts. I assume the later 272 mounts would work just as well in plastic tanks on a 116/120. Pic 1 shows the Dolmar 114 in need of a front mount. Bottom pic shows the Dolmar mount on the left and the 162 Husky mount on the right.

 

[Simondo]

Dolmar guys may already know this, but I'll share this info for anyone who doesn't.

Had a nice Dolmar 114, that needed some mounts. Didn't actually check, but I'm pretty sure they are NLA. Looking at them, I thought some Husky 61/272 mounts might be close enough to work. Sure enough, the Husky mounts are a perfect fit. A 114 is a metal tank saw, so I had to use 162SE mounts. I assume the later 272 mounts would work just as well in plastic tanks on a 116/120. Pic 1 shows the Dolmar 114 in need of a front mount. Bottom pic shows the Dolmar mount on the left and the 162 Husky mount on the right.

View attachment 57997
View attachment 57998

That info will come in handy Bob ...will try one sometime on the top handle front mount (in the steel cup disk) that are on the Dolmar 100 group to see if they do the trick .

 

[cuttinscott]

965403430 are still in stock and available..............


Scott

 

[Spike60]

965403430 are still in stock and available..............


Scott

That's even better news.