Saw video thread

[p61 western]

Rich is a good guy, done business with him for years and he has always treated me right. Had him port a 51.4mm XPW cylinder once, that saw is down right scary!

+1 on this he is a good guy to deal with.

 

[Deets066]

Rich is a good guy, done business with him for years and he has always treated me right. Had him port a 51.4mm XPW cylinder once, that saw is down right scary!

Then why is he such a dope in his videos?

 

[Onan18]

Then why is he such a dope in his videos?

Can't answer that, just speaking from personal experience on dealing with him.

 

[Dolmar Junkie]

Nice try, but I'm not clicking that crap Matt. Same stuff in every video.

Every video, every saw disabled for safety purposes!
That is a good idea, those things can go off at any time...

 

[huskihl]

Then why is he such a dope in his videos?

And what's up with pulling the recoil rope out to turn off a stihl?

 

[Deets066]

And what's up with pulling the recoil rope out to turn off a stihl?

That should be in the thread about how you shut your saws off.

 

[huskihl]

That should be in the thread about how you shut your saws off.

I forgot about that one. Good idear

 

[Dolmar Junkie]

Rich is a good guy, done business with him for years and he has always treated me right. Had him port a 51.4mm XPW cylinder once, that saw is down right scary!

I ran one of his west coast 385's once, it was impressive!
His video presence is definitely not tailored for the whippersnapper crowd, but he allows he's done except on a local level...

 

[maulhead]

Rich is a good guy, done business with him for years and he has always treated me right. Had him port a 51.4mm XPW cylinder once, that saw is down right scary!

I know someone who had him port a 044, all speed, no torque at all, ended up throwing the cylinder in the trash, and having it reported by another builder with a new cylinder.

YMMV.....

 

[Dolmar Junkie]

I know someone who had him port a 044, all speed, no torque at all, ended up throwing the cylinder in the trash, and having it reported by another builder with a new cylinder.

YMMV.....

There ya go, a classic case of "Your experience may vary"

 

[Onan18]

I know someone who had him port a 044, all speed, no torque at all, ended up throwing the cylinder in the trash, and having it reported by another builder with a new cylinder.

YMMV.....

That's surprising, I honestly could not push on the XPW hard enough to stall the chain in seasoned red oak. Most impressive one I have ran to date.

 

[Deets066]

Every one builds a turd now and then

 

[Duane(Pa)]

My dad said: "believe half of what you see, and none of what you hear". Been good advice so far...

 

[TreeLife]

My dad said: "believe half of what you see, and none of what you hear". Been good advice so far...

Qtla

 

[Hedgerow]

I know someone who had him port a 044, all speed, no torque at all, ended up throwing the cylinder in the trash, and having it reported by another builder with a new cylinder.

YMMV.....

Never underestimate a persons ability to step on their dick.

 

[Hedgerow]

That's surprising, I honestly could not push on the XPW hard enough to stall the chain in seasoned red oak. Most impressive one I have ran to date.

That's cause XPW's are awesome, and stihl's suck.
Just sayin...

 

[Dub11]

How about a limited edition ms 250 west coast muscle saw?

LMAO!

How about a limited edition ms 250 west coast muscle saw?

LMAO!

It's missing the 4 inch dogs.

 

[Locust Cutter]

Thought this was an interesting vid!

 

[Brewz]

Damn that thing is moving.
Like to see how it goes here in some hard stuff.

 

[RI Chevy]

The 462 with a little work is very impressive!