Saw video thread

[Chainsaw Jim]

Same as it was. Hopefully pull it down tomorrow. Wanted to get a baseline before I do anything else.



Sent from my SM-G950U using Tapatalk

I'm wondering how much more it's gonna gain just by breaking in.

 

[Red97]

I'm wondering how much more it's gonna gain just by breaking in.

Has 5 full tanks through it now. Bottom end is broke in,(used bearings/seals) the cylinder/ring may have a bit more seating in to do, but have to be close by now.

Sent from my SM-G950U using Tapatalk

 

[RI Chevy]

Cool vids Kevin. Was it a stock 026? Guy needs an Artic model. Lol
Have him get in touch with Gary.
Saw ran pretty strong.

 

[Mastermind]

Whose saw is that?

It was mine......about 5 years ago.

 

[huskihl]

Cool vids Kevin. Was it a stock 026? Guy needs an Artic model. Lol
Have him get in touch with Gary.
Saw ran pretty strong.

I ported it and fitted an 044 carb to it.

 

[beaglebriar]

So I sold my 026 to a guy in Alaska. He cuts pine for firewood because that's what he has....millions of acres of it. Seems like a good fit for him. He sent me these a bit ago and he seems pretty happy with the saw

She runs nice! Pine works real good in the sap cooker,burns hot and fast. [emoji106]

 

[huskihl]

She runs nice! Pine works real good in the sap cooker,burns hot and fast. [emoji106]

He's texted me 10 times about how much he likes it. He has to cut in winter after the river freezes so he can cross it. He mostly cuts 8" poles and hauls them on a sled and snowmobile to his truck and trailer. Fills half the trailer with poles and loads the snowmobile on the back. He's usually tredging through 3' of snow so a lightweight saw is a must

 

[RI Chevy]

Nice job with the 026 Kevin!
Runs real strong. [emoji106]

 

[TreeLife]

I don't have any new videos, just pictures of me standing on a pile of timber...

 

[beaglebriar]

He's texted me 10 times about how much he likes it. He has to cut in winter after the river freezes so he can cross it. He mostly cuts 8" poles and hauls them on a sled and snowmobile to his truck and trailer. Fills half the trailer with poles and loads the snowmobile on the back. He's usually tredging through 3' of snow so a lightweight saw is a must

Chit we have it way too easy...lol

 

[sawmikaze]

He's texted me 10 times about how much he likes it. He has to cut in winter after the river freezes so he can cross it. He mostly cuts 8" poles and hauls them on a sled and snowmobile to his truck and trailer. Fills half the trailer with poles and loads the snowmobile on the back. He's usually tredging through 3' of snow so a lightweight saw is a must

But here are the REAL questions...

Does he run a square chisel chain ?

Does he use red armor ?

 

[Deets066]

But here are the REAL questions...

Does he run a square chisel chain ?

Does he use red armor ?

Well he has a ported saw, so you have to run red armor right?
And I didn't know there was anything but square chain.

 

[sawmikaze]

Well he has a ported saw, so you have to run red armor right?
And I didn't know there was anything but square chain.

Sounds like he needs a tach mounted to his saw ?

 

[Mastermind]

I don't like red armor. Saws ain't supposed to have periods.

 

[huskihl]

But here are the REAL questions...

Does he run a square chisel chain ?

Does he use red armor ?

Yes

No

Sounds like he needs a tach mounted to his saw ?

And yes. Works Connection. Cuz i was leary about selling someone a saw that heats up and leans out on long cuts. Told him to keep it under 15k for it to be safe. I sleep better now. Well, other than not using Red Armor...

 

[dustinwilt68]

Honda hp2 ftw

 

[huskihl]

I don't like red armor. Saws ain't supposed to have periods.

Mic drop?

 

[Definitive Dave]

editing and posting some more older vids that never got posted from the Spring Cutting Edge NY GTG

 

[RI Chevy]

What did Mike hit? A knot? Mike, were you running the hybrid?

 

[Red97]

I don't like red armor. Saws ain't supposed to have periods.

Heavy flow.....

Sent from my SM-G950U using Tapatalk