Saw video thread

[Time's Standing Stihl]

Cleaned up and ported the 7310 I got from Guido. She runs OK.

Here's my TM 7900

And here's the 7310 I ported. Same bar and chain

Rakers are a touch low. No messing around lol

7310 is stout Kevin. It has a sweet sound to it!

 

[huskihl]

Nice. Which is your favorite to run?

Both the same...there's nothing about one or the other that stands out

 

[huskihl]

7310 is stout Kevin. It has a sweet sound to it!

It should. Gutted the horn inside, doubled the factory opening, and added a 1-1/4" square on the other side

 

[RI Chevy]

Nice. Which is your favorite to run?

Both the same...there's nothing about one or the other that stands out

So many videos, I got confused. But I did ask a loaded question. Many members could have answered. Thanks Huskihl. LOL

 

[mdavlee]

So many videos, I got confused. But I did ask a loaded question. Many members could have answered. Thanks Huskihl. LOL

I wasn't sure if you were asking me or not. My favorite is probably the Solo. The 044 has made about 6 cuts on the new piston.

 

[RI Chevy]

You noticing the 044 loosening up? Notice any power gains as it breaks in?

 

[mdavlee]

You noticing the 044 loosening up? Notice any power gains as it breaks in?

Not yet. I made those 6 cuts or so and went in the for the night

 

[paragonbuilder]

Cleaned up and ported the 7310 I got from Guido. She runs OK.

Here's my TM 7900

And here's the 7310 I ported. Same bar and chain

Rakers are a touch low. No messing around lol

Nice job Kevin! I like the cackle of the 7310!!


Sent from my iPhone using Tapatalk

 

[jmssaws]

Little hollow spot on the back in hit the first 2 cuts. I'll run it in bigger wood later

 

[GoBigBlue1984]

And it's a stihl.

Amen!


Sent from my iPhone using Tapatalk

 

[GoBigBlue1984]

haven't cut in a while picked up some gas and headed out to to run a couple before tomorrow.
Spending the day at the United way firewood project. Bringing a couple saws and wanted to make sure they were all right.

Hell Yes!!
Nice David. I want that recipe from the 2nd.


Sent from my iPhone using Tapatalk

 

[jmssaws]

This is a good running saw.

 

[Time's Standing Stihl]

Whole Lotta chain right there! Nice job Jason [emoji106]

 

[Frank bierce]

This is a good running saw.

That pulls nicely!!!

 

[drf256]

Looking great again Jason. You've got them saws down pat.

 

[jmssaws]

Looking great again Jason. You've got them saws down pat.

Thanks al.
Amazing how strong one can be with very little compression or muffler outlet.
Goes against everything I think I know.

 

[drf256]

Yeah. I'm moving away from high compression.

@Jchin 044 let me feel that myself. One of the free-est running saws I've done with only 10 out of the band. 180psi.

There's something to it. Although my 026 hum along nicely at 240 psi.

 

[drf256]

OverPorting is worse than a stock saw at times.

 

[jmssaws]

Yeah. I'm moving away from high compression.

@Jchin 044 let me feel that myself. One of the free-est running saws I've done with only 10 out of the band. 180psi.

There's something to it. Although my 026 hum along nicely at 240 psi.

Here's the easy start am cylinder 064 i did for jack,150lbs of compression

 

[Brewz]

Here's the easy start am cylinder 064 i did for jack,150lbs of compression

Those 064's are amazing.
My 066 has far less appeal now that I have a hot 064. Its a great saw but it just doesn't have the same zing to it