Saw video thread

[RI Chevy]

Nice job Al. Nice job with the chain raker testing Dan. [emoji106]

 

[paragonbuilder]

China 446 finally came alive.

The new 461 carb was bad.

Thanks to @paragonbuilder for straightening it out for me, lending me a carb, doing alot of work, and helping me with chains.

C446

Labels are off on vids
First video is .060 7 pin and was fastest I think
Sec video is .060 8 pin
Third video untouched rakers 7 pin bar cutting crooked
Fourth video .040 7 pin

And you are very welcome!
Was fun despite the setbacks. Wish I had more time...

 

[huskyboy]

Full comp? Skip? Square I assume?

 

[paragonbuilder]

Full comp? Skip? Square I assume?

Full comp

 

[Redfin]

Last vid she wants some more fuel. Grind looks good Dan.

 

[paragonbuilder]

Last vid she wants some more fuel. Grind looks good Dan.

Thanks, John
It definitely heated up with repeated cuts, but it help tune good at the end
I think I had it dialed in pretty good by the time I was done. The videos are a little mixed up.

 

[Fruecrue]

394xp stock, fresh rings and hone. 8 pin.

 

[Fruecrue]

I know it’s not fair, but here’s a ported 660 clone, 8 pin with a different chain for comparison.
Same wood, twice the speed.

 

[Dub11]

I know it’s not fair, but here’s a ported 660 clone, 8 pin with a different chain for comparison.
Same wood, twice the speed.

You best get to grinding on that tree nindie 4

 

[Fruecrue]

You best get to grinding on that tree nindie 4

Looks like I need a good recipe.

 

[Dub11]

Looks like I need a good recipe.

You telling me a BGD,TA, MM and HD2 won't make it a screamer ?

 

[Fruecrue]

You telling me a BGD,TA, MM and HD2 won't make it a screamer ?

I was hoping to pull a 33” blade.

 

[Dub11]

I was hoping to pull a 33” blade.

It'll do it and its ecofriendly too since you dont have to dump mix on the flippy caps to clean them out.

 

[p61 western]

I was hoping to pull a 33” blade.

No way it's a stock saw.

 

[p61 western]

Looks like I need a good recipe.

See how it is after a couple tanks through it.

 

[cus_deluxe]

Looks like I need a good recipe.

I think kevin cut .045 from base, .035 from band on mine. Left squish around .025 if i remember right. Raised and reshaped uppers slightly, didnt alter ex or int timing hardly after machine work. Runs nice i think, ex around 103-104

 

[cus_deluxe]

Meteor 395 piston

 

[Fruecrue]

I think kevin cut .045 from base, .035 from band on mine. Left squish around .025 if i remember right. Raised and reshaped uppers slightly, didnt alter ex or int timing hardly after machine work. Runs nice i think, ex around 103-104

Video?

 

[cus_deluxe]

Video?

Gotta make a new one, cant send the one i made over email cuz its too big. Ill try this afternoon

 

[Bbintwn]

So I'm still not sure how I got this lucky but Steve @crackerbuilt offers me a deal I couldn't refuse! He told me to get a saw to his builder and he'd pay for it. Me totally taken aback I sent the cleanest new saw I have to Mr. Flagg @redlight066. He kept me knee deep in updates and pics

Before

After

The ol 6100 is cooking now and thanks again guys cant wait to a few more tank in her.


Now he just needs to come up with some stickers so it doesn't feel so naked lol.

Oh and Steve I'll get you back some how bwahahaha. Thanks again dude.

when he builds mine I have him put extra mufflers on them so their not loud and scary