Saw video thread

[Deets066]

According to Sluga’s 036/360 is 61.5
361/362 are 59
If I’m not mistaken 036/360 and the husky 261/262 are same bore and stroke

Yeah, I knew the 036 was bigger. Didn’t know the 360 was too. Thanks Dan

 

[RI Chevy]

I think my sticker shows 62cc on my 360.
But it could be an 036 too. LOL
Not sure now. Saw is a 1999 model.

 

[rattler]

@Deets066 do you mean a 262xp? The 261 was a dished piston detuned version of the 262 I believe.

You are correct

 

[Redfin]

Husky 261 can run more than a 16 or 18

A German 261 can run a 24".

 

[Bigmac]

First day using the new to me 2100! The governor works! Lol it has 165 psi compression and 52 thousands squish, I wonder what porting would do? Lol

 

[Bigmac]

First cuts with my 750, it was a basket case I redid about a year ago, hadn’t really cut anything with it..just started it up and listened to it idle! Lol I like it!!

 

[ferris]

@Bigmac
2100xp with 3/8?
750 with 404?

 

[Bigmac]

@Bigmac
2100xp with 3/8?
750 with 404?

Both 3/8 8pin the 750 has semi-skip and 2100 has full skip, both stihl round file

 

[MustangMike]

Yea, every time someone tries to tell me a 7900 (79 cc) is a 70 cc saw (like a 044 or 372) I say yea, OK, and my 362 is a 50 cc saw!

(Forgot to hit post when I wrote this)

 

[MG2186]

Yea, every time someone tries to tell me a 7900 (79 cc) is a 70 cc saw (like a 044 or 372) I say yea, OK, and my 362 is a 50 cc saw!

(Forgot to hit post when I wrote this)

Similar to comparing 461’s to 372’s all the time

 

[Deets066]

5 cube= 372 OE - 281

This includes all 70 cc saws. 044/046 and dolmar 7910. Same class

 

[Chainsaw Jim]

I wonder what porting would do? Lol

Here's what porting can do.

 

[MustangMike]

5 cube= 372 OE - 281

This includes all 70 cc saws. 044/046 and dolmar 7910. Same class

I'm just a fire wood cutter, not a racer, and I would never expect a 044/440 to cut with a ported 460/461/7900/7901.

The 044 is often a full pound lighter, and much easier to use for limbing. I have both, and don't consider them the same at all.

 

[Jswanson]

5 cube= 372 OE - 281

This includes all 70 cc saws. 044/046 and dolmar 7910. Same class

Wouldn't any saw over 4.0 be considered in that class? Like 665....

 

[RI Chevy]

Here's what porting can do.

Nice job Jim. I saw that vid before when you posted it.

 

[Deets066]

Wouldn't any saw over 4.0 be considered in that class? Like 665....

Pretty much, 665 usually skimps by in the 4 cube seeing it’s less than 1 cc over

 

[Bigmac]

Here's what porting can do.

Looks good!

 

[huskyboy]

372’s don’t look to have any problem hanging with any of the 5 cube class

 

[Deets066]

372’s don’t look to have any problem hanging with any of the 5 cube class

Not at all

 

[RI Chevy]

Lol. 72cc???