Saw video thread

[t4driller]

Saw cuts good!

A little trick, I think @t4driller showed, is leave a slight bit on top and plunge through and cut out the bottom. Then come back up top and Clip it. Acts like a wedge.


Sent from my iPhone using Tapatalk

i think this was the video u were referring to Dan. Realky helps to keep u from getting pinched. Especially wit dem huskies with outboard clutch. Lol

Sent from my SM-G930V using Tapatalk

 

[RI Chevy]

Those Stihl Hybrids are the cats ass. Awesome!

Sent from my SM-G930V using Tapatalk

 

[t4driller]

It was somewhere around 14,500 in the video. Still had alot more

I had mine at 14.6 with a nice 4 stroke. I took it up to 15 and like deets says it lost some power.

Sent from my SM-G930V using Tapatalk

 

[paragonbuilder]

i think this was the video u were referring to Dan. Realky helps to keep u from getting pinched. Especially wit dem huskies with outboard clutch. Lol

Sent from my SM-G930V using Tapatalk

That be it Mike!
Thanks again for that. I use it all the time now.


Sent from my iPhone using Tapatalk

 

[Brewz]

So, at 14500 RPM, will a hybrid outperform a hot 044 or 046?

 

[RI Chevy]

Good question Brewz.

Sent from my SM-G930V using Tapatalk

 

[Canadian farm boy]

So, at 14500 RPM, will a hybrid outperform a hot 044 or 046?

IMO a properly built hybrid will be faster and stronger then a 044 no matter what bar. It should also be faster then a 046 with bars upto 25"-28". Once you get to a 28" or bigger the hybrid should be about equal to a 046.
Just my opinion.

 

[T.Roller]

So, at 14500 RPM, will a hybrid outperform a hot 044 or 046?

Mine is much stronger than it was with a ported 044 top end

 

[MustangMike]

IMO, the best running Hybrids will run right with the best ported 046/460s, but many of the Hybrids will fall short of that goal, generally having very good speed but lacking the torque of the ported 046/460s.

Ports, port timing and carbs all play an important role, and the saw will not meet it's potential with the wrong match.

My strongest ported 460 likes the HD-50 carb. My Hybrid likes the HD-11 Carb. They both run neck & neck. If I swap carbs between the two, they will still be neck and neck, but both saws will be 10-15% slower. That is a big difference!

 

[paragonbuilder]

So, at 14500 RPM, will a hybrid outperform a hot 044 or 046?

My 460 is very strong! And Deets hybrid beat it consistently up to a 28" like Mike said. I didn't have a bigger bar at the time.

 

[Deets066]

Each saw is so different it's hard to make a comparison like that. Next week somebody could port a 44/440 and take all these hybrid's lunch money.

 

[TreeLife]

This is coming home soon, a birthday present to myself

 

[huskihl]

Moved camera to the business end. Same log

 

[big t double]

My 460 is very strong! And Deets hybrid beat it consistently up to a 28" like Mike said. I didn't have a bigger bar at the time.

Well....deets hybrid is the nastiest saw ever. Don't feel bad. At least you lick more mouse jizz than he does. Winning.

 

[Deets066]

Well....deets hybrid is the nastiest saw ever. Don't feel bad. At least you lick more mouse jizz than he does. Winning.

Thanks...... I think

 

[big t double]

Thanks...... I think

 

[t4driller]

That be it Mike!
Thanks again for that. I use it all the time now.


Sent from my iPhone using Tapatalk

Your welcome dan..

Sent from my SM-G930V using Tapatalk

 

[RI Chevy]

Any other cutting techniques or tips anyone wants to share?

I am all eyes and ears.

 

[MustangMike]

Always keep some wedges and the X-27 close by. They can often open things up a lot faster than another saw can cut you out.

 

[Armbru84]