Saw video thread

[huskyboy]

Saw cuts good!

A little trick, I think @t4driller showed, is leave a slight bit on top and plunge through and cut out the bottom. Then come back up top and Clip it. Acts like a wedge.


Sent from my iPhone using Tapatalk

Yeah works great for pinch situations at landing here too. I end up bore cutting dirty ones too makes chain last much longer.

 

[T.Roller]

Buddy it looks bad azz! Definitely pulls hard. Sounds fat but that's not a bad thing considering it's a fresh build. Run er a couple tanks and turn that bish up.
I like it Dave. Seriously it looks great.
Maybe I'll get to fondle it some in October

Yes sir it was 4 stroking hard. Still had plenty more. Thank you for your kind words now it just needs @Deets066 blessing lol

 

[sawmikaze]

It seem like if you have joined in the last 15 mins you have a MOFO

I just have a couple moe-fro saws.

 

[Deets066]

Yes sir it was 4 stroking hard. Still had plenty more. Thank you for your kind words now it just needs @Deets066 blessing lol

Is that The best you guys could do??

 

[Deets066]

 

[T.Roller]

Is that The best you guys could do??

That's about what I was expecting

 

[Deets066]

That's about what I was expecting

Put a tach on it, you'll be surprised where it tunes

 

[T.Roller]

Put a tach on it, you'll be surprised where it tunes

It was somewhere around 14,500 in the video. Still had alot more

 

[Deets066]

It was somewhere around 14,500 in the video. Still had alot more

After 15,000 or so they don't seem to gain much power. Just because they will tune higher doesn't mean that's the sweet spot. It takes fuel to make power, more you can burn efficiently the more power you make.

Nice runnin saw BTW

 

[Duane(Pa)]

After 15,000 or so they don't seem to gain much power. Just because they will tune higher doesn't mean that's the sweet spot. It takes fuel to make power, more you can burn efficiently the more power you make.

Nice runnin saw BTW

BINGO

 

[Dub11]

I just have a couple moe-fro saws.

Pics????????

 

[T.Roller]

After 15,000 or so they don't seem to gain much power. Just because they will tune higher doesn't mean that's the sweet spot. It takes fuel to make power, more you can burn efficiently the more power you make.

Nice runnin saw BTW

Thank you. I'm just guessing on rpm by the how it sounded when we put a tach on it during its first start up.

 

[Deets066]

Thank you. I'm just guessing on rpm by the how it sounded when we put a tach on it during its first start up.

I really like the works tach or the TTO tach. Comes with a nice mounting bracket and you can check tune anytime you want. Clock and hour meter too

 

[T.Roller]

I really like the works tach or the TTO tach. Comes with a nice mounting bracket and you can check tune anytime you want. Clock and hour meter too

Yeah I've had one on my 395 since it was new. The works tach that is.

 

[T.Roller]

My chinese buildoff saw. Still stock for the moment.

 

[Deets066]

So is the hybrid showdown still on at Randy's place?

 

[T.Roller]

So is the hybrid showdown still on at Randy's place?

Didn't know we were having one but sure! Thought we were having a 064 288 showdown

 

[Deets066]

Didn't know we were having one but sure! Thought we were having a 064 288 showdown

CFB and I talked about the hybrid showdown.

I forgot about the 64-288 but yeah, that too

 

[t4driller]

Tree had fell on a slope so in this video I was trying to keep it from pinching. Same wood.

Looks real good dave!! Should wake up a good bit more with some time on her.

My Hybrid that @rattler and I built. I'm very proud of how it turned out. Saw is tuned rich. 20" 8 pin in red oak

Sent from my SM-G930V using Tapatalk

 

[T.Roller]

Looks real good dave!! Should wake up a good bit more with some time on her.



Sent from my SM-G930V using Tapatalk

Thank you Mike