Saw video thread

[paragonbuilder]

Woohoo!!


Sent from my iPhone using Tapatalk

 

[Fruecrue]

My beater 036 Pro. Made up from a saw missing a bunch of non critical parts and fixed up with a few OEM and Huztl parts.

Stock except for a muffler mod and timing advance.

Semi chisel chain as chisel doesn't stay sharp long in the wood around here. The wood is soft, Linden I think. Comparable to pine or poplar except it splits like Elm only not so easily I noodled most of it up.
I'm pretty happy with it considering I'm mostly and old saw guy.


Happy 4th guys

I love a saw that gets all stuffed up with noodles and give zero *f-words.

 

[Wolverine]

Had @Hot Husky 365 on the trigger for some chain testing today.
Started with a loop that I hand filed in an attempt @ "race" chain.
3 cut average 2.86

Next was the 25/15 @ 3.26 average.

Then 20/15 @ 4.40. We both noticed the rakers needed lowered on this run.

So I lowered them with my guide. Ran 3.47 average. I think I could have gone lower.

 

[Definitive Dave]

The secret to perfect rakers is to "keep going lower till the saw gets slower" and then put a little back

 

[Wolverine]

Putting it back is the secret no one has taught me yet!

394 next.

3.50 average

2.95 average

2.85 average

 

[huskyboy]

Had @Hot Husky 365 on the trigger for some chain testing today.
Started with a loop that I hand filed in an attempt @ "race" chain.
3 cut average 2.86

Next was the 25/15 @ 3.26 average.

Then 20/15 @ 4.40. We both noticed the rakers needed lowered on this run.

So I lowered them with my guide. Ran 3.47 average. I think I could have gone lower.

Them closed port 48mm's run better than you'd think. Mine suprised me. Fun with a 20" bar. Sucker pulls and oils a 28 just fine too, impressive for 65cc if you ask me.

 

[dall]

Putting it back is the secret no one has taught me yet!

394 next.

3.50 average

2.95 average

2.85 average

take a stroke off both chains maybe 2 on the 25/15 it seems to like .035

 

[Wolverine]

Roger that. The 25 loop seemed great as it was. The 20 needs more love. lol!

Got the Jonny sealed back up.

 

[stihl_head1982]

You Sir -- have put some mojo in that MS260!

 

[Redfin]

Not a stihl , a little ripper , 20" 3/8th round 8 pin

Yesp.

 

[Redfin]

 

[Brewz]

My 066 came back home for some porting updates and a checkup.
It goes better now!

Tested done china chain and it was rubbish

 

[Brewz]

Then bolted the same bar and Oregon chain from the end of the 066 video on my 044 running the WJ carb.
The chain was going backwards by the cut due to the timber resembling stone and having a 6" dirt core, but the 044 is strong.
@MustangMike

The 066 has about 20% on it which is nice cause it usually has 30%+ on a stock 066/660

 

[t4driller]

350/346 I finished up. On it's first tank of petro

Sent from my SM-G930V using Tapatalk

 

[t4driller]

I like to put the primer bulb top cover on for testing. Can get at the carb alot easier.

Sent from my SM-G930V using Tapatalk

 

[dall]

 

[RI Chevy]

Nice Dallas. All stock?

Sent from my SM-G930V using Tapatalk

 

[dall]

Nice Dallas. All stock?

Sent from my SM-G930V using Tapatalk

lmao wtf
ported by kevin and 8 pin

 

[paragonbuilder]

Sent from my iPhone using Tapatalk

 

[RI Chevy]

lmao wtf
ported by kevin and 8 pin

I thought it was running pretty good. Lol. [emoji106]

Sent from my SM-G930V using Tapatalk