Saw video thread

[RI Chevy]

Nice job Mike. Eric will be very happy with that I am sure.

 

[malk315]

@malk315

Damn Mike. Looks and sounds Stout!
Psyched to get it. In the video at 00:25 or 00:26 is that a 4 stroke I hear for a moment or do you think it might've hit the rev limit? I think you said 14,100 limit coil or somewhere around there. I just may have to bring it to Dan's @paragonbuilder before the NY GTG and see if @huskyboy can stop in for 70cc+ mini hoosky GTG. 372/385/394 fest.

I was at Dan's yesterday and he got a closer look at inboard clutch on 365. That's what I like about 372/385/390 the inboard clutch. As long as chains are sharp no problem!

Sent from my XT1585 using Tapatalk

 

[mdavlee]

Damn Mike. Looks and sounds Stout!
Psyched to get it. In the video at 00:25 or 00:26 is that a 4 stroke I hear for a moment or do you think it might've hit the rev limit? I think you said 14,100 limit coil or somewhere around there. I just may have to bring it to Dan's @paragonbuilder before the NY GTG and see if @huskyboy can stop in for 70cc+ mini hoosky GTG. 372/385/394 fest.

I was at Dan's yesterday and he got a closer look at inboard clutch on 365. That's what I like about 372/385/390 the inboard clutch. As long as chains are sharp no problem!

Sent from my XT1585 using Tapatalk

4 stroke. It has a black coil. I can swap the to a 14.1k if you want. It was tuned to around 13.6k. The pipe outlets are harder to hear 4 stroking to me.

 

[huskyboy]

Nice 385 @malk315, strong 385 #3! That "little" 2171 kept right up with the bigger saws

 

[mdavlee]

Nice 385 @malk315, strong 385 #3! That little 2171 kept right up with the bigger saws

It sure did. Makes me wonder why I even consider having a 80-100cc work saw again.

 

[X 66 stang347 X]

Here's the China 660. Phone died half way through

 

[malk315]

4 stroke. It has a black coil. I can swap the to a 14.1k if you want. It was tuned to around 13.6k. The pipe outlets are harder to hear 4 stroking to me.

Would love the black coil to stay then I won't confuse for limiter. I like to use a tach to help with tuning. Same here on hard time hearing 4 stroking when I'm running the saw. Video or watching a buddy run it helps a lot for me! Thanks again for putting that saw together for me Mike!

Sent from my XT1585 using Tapatalk

 

[T.Roller]

Great looking saws mike

 

[malk315]

Hey Mike what bar length on the 385?

Sent from my XT1585 using Tapatalk

 

[mdavlee]

Would love the black coil to stay then I won't confuse for limiter. I like to use a tach to help with tuning. Same here on hard time hearing 4 stroking when I'm running the saw. Video or watching a buddy run it helps a lot for me! Thanks again for putting that saw together for me Mike!

Sent from my XT1585 using Tapatalk

That's fine. I was surprised it came with a black coil so if you want it I won't swap it. I think it would have done that b/c with the 9 pin but it wouldn't fit. I tried this morning.

 

[mdavlee]

Great looking saws mike

Thanks Dave. I had forgot about those logs. If you come back up in the summer we can tackle some more of it.

 

[T.Roller]

Thanks Dave. I had forgot about those logs. If you come back up in the summer we can tackle some more of it.

I had the bar and chain for them too lol would have done much better than in the cants

 

[malk315]

That's fine. I was surprised it came with a black coil so if you want it I won't swap it. I think it would have done that b/c with the 9 pin but it wouldn't fit. I tried this morning.

Yup. I prefer unlimited coils. I'll probably run it mid 13's anyway for some margin. 9 pin... Wow.

Sent from my XT1585 using Tapatalk

 

[huskyboy]

My tach is very helpful to me as it takes longer for me to catch onto four stroking as I'm hearing impaired, but I can hear it. My 385 runs good 13000 to 13700 rpm. I run it on the fatter end of the rpm range the bigger the wood.

 

[mdavlee]

Yup. I prefer unlimited coils. I'll probably run it mid 13's anyway for some margin. 9 pin... Wow.

Sent from my XT1585 using Tapatalk

34" 110 dl bar. It's got some balls.

 

[T.Roller]

34" 110 dl bar. It's got some balls.

But does it pop?

 

[huskyboy]

Mine pops when I lift in cut

 

[paragonbuilder]

Mine pops when I lift in cut

Pops or 4 strokes?

 

[huskyboy]

Four strokes

 

[jmssaws]