Saw video thread

[dolmarkid]

Guess I need a 661

 

[X 66 stang347 X]

I know it will adjust for a leaking seal for awhile.

 

[Toad22t]

Here's my ported wet noodle up against my old ported cylinder block 460 arctic! Not to bad for giving up 6cc's.

 

[P.M.P.]

Here's my ported wet noodle up against my old ported cylinder block 460 arctic! Not to bad for giving up 6cc's.

Noodles are good

 

[X 66 stang347 X]

The EPA is closing in on the OPE market so before long Stihl going to stop offering the carb choice on the models you can get either. The 250's and the 180's are going off the line next anyway their just using up to much carbon credits. Reason for the Fs80 and br420 line to die

 

[jmssaws]

Here's my ported wet noodle up against my old ported cylinder block 460 arctic! Not to bad for giving up 6cc's.

Ive owned several 371's but never a 372.
Strange now that I think about it

 

[drf256]

Ive wondered that myself.
You'd be a lot cooler if it was your stove. Lol

And probably single. No way my wife wouldn't aggravate me about that in the house.

 

[drf256]

@Stihlsmoking MS360

Comp 190. 104/120/79-81 intake. May still pull jug and add bridges, haven't decided yet. I'm having a problem knowing what's fast and what isn't these days.

Here it is tuned 13,800. 14,200 after the cuts.

Wood could be better, it's all I've got.

 

[paragonbuilder]

@Stihlsmoking MS360

Comp 190. 104/120/79-81 intake. May still pull jug and add bridges, haven't decided yet. I'm having a problem knowing what's fast and what isn't these days.

Here it is tuned 13,800. 14,200 after the cuts.

Wood could be better, it's all I've got.

Looks good doc, looks fast and strong to me!

 

[RI Chevy]

Sounds really good. Are those the first cuts? Does the saw continue to loosen up during break in?

 

[trooney]

Both have square chains I filed.
Wood is rock hard

The mtronic is incredible,no matter what I do or change it is immediately tuned and ready.
I've had 3 different cylinders on and off a dozen times and 3 different mufflers and I have reset it twice but didn't need to.
Runs perfect all the time every time.
I'm In love

Is that the original #1 or the cylinder I sent you? It looks strong. I love the grunt its got. You ought to have my saw tomorrow. That 394 looks awesome too!!

 

[drf256]

Sounds really good. Are those the first cuts? Does the saw continue to loosen up during break in?

If youre referring to me, yes, first cuts.

 

[RI Chevy]

Yes Doc. OK. Thanks.

 

[MustangMike]

Stock the 661 seems to eat 066 & 660s alive. Ported, the 661s may still be in uncharted territory. Several porters seem to know how to ring the performance from an 066/660.

Nice job there Al, your saws always seem like you can lean on em a bit more than you would expect, which is NICE!

 

[jmssaws]

Made another small adjustment

 

[RI Chevy]

Sounds strong Jason. Just curious if you tached it out? It sounds so much faster and higher reving than some of the others you've done.

 

[jmssaws]

Sounds strong Jason. Just curious if you tached it out? It sounds so much faster and higher reving than some of the others you've done.

It's just the way it sounds.
It's actually slower than any other information build
It's limited to just over 13k
My other saws are always 14k+

 

[Chainsaw Jim]

My buddy delivered a couple nice fir logs today and brought his brand new 390 with him so I could do a same bar and chain comparison with @sawfun Don's 505. The 390 was hopped up locally and set up for milling. Don's 505 is ported but was not set up for milling.

 

[RI Chevy]

Both run good there Jim.

 

[X 66 stang347 X]

Sounds strong. Does your neighbor complain any about the saws. I have to ask because I've been wondering.