Random pics (that you took) thread...

[Mkinslow]

You got me thinking. I worked at a party rental place back in the day. I bet you could repurpose adjustable stage legs, half would be premade half fab. I see a steel frame. Pin the leg not on the end but in a bit which would allow for the leg to be folded up and pinned in place for transport. The legs are set with their adjustment holes but micro adjustments could be done with your jacks. Something like this. Edit: I forgot that the small adjustments can be done with the base that is threaded.
View attachment 193650
http://www.stagedrop.com/portable-staging/biljax/AS2100-adjustable-stage-leg-sets

Or yall could use the trailer tongue jacks that pivot out of the way

Sent from my SM-G892A using Tapatalk

 

[ChipsFlyin]

Went elder berry hunting this am. I have not seen a loaded bush like this in many years.

Settled down to about 3 gallons. After cleaning will be probably 1.5 gal. I have not had homemade elder berry jelly in at least 20 years. You see it at the markets and stores occasionally but it is nowhere near the same.

This guy jumped out about 10 ft away from me. I don't startle easy but flinched quite a bit. LOL

 

[Bigmac]

So....when I was at dunefest I had spark plug issues with the banshee, porcelain cracked, in the process of trying to figure out what was causing it, I kind of found the problem one of my carburetors has an issue, and I don’t know what the problem is but I decided to switch to another set of carburetors and modify them for alcohol. What a difference it made, I’m getting a more consistent tune out of them, and good plug the readings now, with the exact same set up just a different set of carbs! LOL went out and tested it today and it pulls like a freight train right off the bat! Super excited to do a little racing now! I am using China knock offs, The first set was constant issues, hoping these work better, but I’m not going down that road ever again! The float seat on the carburetor is dangerously undersized, I measured the stock seat at .109and the genuine

Made a getto purge tank

are .145

 

[redline4]

Eastern Montana.


@Steve and @Mastermind zoom in on the right of this pic. You guys would be in baling heaven out here...thousands of acres, hundreds of bales..



Just east of Browning Montana. Can finally start to see mountains.



About 20 miles east of Glacier.

 

[redline4]

@Dub11 browning montana.
Straight ghetto..

Wife and kids went into grocery store. Tattoo face indian dude come up to me and the dog in the truck asking for money..



That truck was travelling down Hwy 2..
Which runs across the whole damn country. 70mph speed limit out here on it. Sittin on lawnchairs in the box.

 

[Steve]

Eastern Montana.
View attachment 193762

@Steve and @Mastermind zoom in on the right of this pic. You guys would be in baling heaven out here...thousands of acres, hundreds of bales..

View attachment 193763

Just east of Browning Montana. Can finally start to see mountains.

View attachment 193764

About 20 miles east of Glacier.

View attachment 193765

Wow! Thats pretty nice countryside there.

And a ton of bales! Holy chit!

 

[Steve]

Got a text from a friend asking if i wanted to go fishing this evening. Said im there! Took my daughter out for her first outing on the river. Up till now she has only paddles around lakes. Took her through a few low key rapids and she did great! The bridge in the last pic goes under water every now and then when it floods.

 

[Dub11]

Eastern Montana.
View attachment 193762

@Steve and @Mastermind zoom in on the right of this pic. You guys would be in baling heaven out here...thousands of acres, hundreds of bales..

View attachment 193763

Just east of Browning Montana. Can finally start to see mountains.

View attachment 193764

About 20 miles east of Glacier.

View attachment 193765

I always get excited when approaching the Rockies

@Dub11 browning montana.
Straight ghetto..

Wife and kids went into grocery store. Tattoo face indian dude come up to me and the dog in the truck asking for money..

View attachment 193767 View attachment 193768

That truck was travelling down Hwy 2..
Which runs across the whole damn country. 70mph speed limit out here on it. Sittin on lawnchairs in the box.

WTF why do I get tagged for the ghetto chit lol

 

[redline4]

I always get excited when approaching the Rockies


WTF why do I get tagged for the ghetto chit lol

Cuz your always tellin us how Ghetto Topeka is!
I wasnt even in town 5 minutes and was damn near ready to pull iron!

 

[Steve]

So....when I was at dunefest I had spark plug issues with the banshee, porcelain cracked, in the process of trying to figure out what was causing it, I kind of found the problem one of my carburetors has an issue, and I don’t know what the problem is but I decided to switch to another set of carburetors and modify them for alcohol. What a difference it made, I’m getting a more consistent tune out of them, and good plug the readings now, with the exact same set up just a different set of carbs! LOL went out and tested it today and it pulls like a freight train right off the bat! Super excited to do a little racing now! I am using China knock offs, The first set was constant issues, hoping these work better, but I’m not going down that road ever again! The float seat on the carburetor is dangerously undersized, I measured the stock seat at .109and the genuine
View attachment 193761
Made a getto purge tankView attachment 193760

View attachment 193759 are .145

Nice! Do you think it has enough powa to climb vertical yet?!

 

[Steve]

Cuz your always tellin us how Ghetto Topeka is!
I wasnt even in town 5 minutes and was damn near ready to pull iron!

Truf.

 

[redline4]

Western view of the cabin we are at.

And an old Furd. Lots of old stuff out here, very little to no rust on it.

 

[Steve]

Western view of the cabin we are at.

And an old Furd. Lots of old stuff out here, very little to no rust on it.
View attachment 193776 View attachment 193777 View attachment 193779

I could definitely wake up to that view and old ferd every day!

 

[p61 western]

I could definitely wake up to that view and old ferd every day!

Yes and yes lol.

 

[kingOFgEEEks]

Toured the battleship Wisconsin today with the two youngest while the oldest sacked out in the van with momma due to an upset stomach. I don’t they fully grasped the significance, but it’s a start.

 

[chipper1]

Before we miss out on an opportunity for a 572 pic .
Top to the bottom
Mine ported xt
beater saw (rocking 372 oe)
372 oe (the pretty one)
576xp
572xp (previously @Armbru84 saw)
The only one I still have is the ported xt, things change fast lol.

 

[Dub11]

Cuz your always tellin us how Ghetto Topeka is!
I wasnt even in town 5 minutes and was damn near ready to pull iron!

Well we have everything you described other than bed riders.

Before we miss out on an opportunity for a 572 pic .
Top to the bottom
Mine ported xt
beater saw (rocking 372 oe)
372 oe (the pretty one)
576xp
572xp (previously @Armbru84 saw)
The only one I still have is the ported xt, things change fast lol.
View attachment 193780

You have a 572?

 

[chipper1]

Tunnel Park Holland MI, tunnel leads to the beach.
Guess what kind of three lol.


Same picture cropped.

 

[chipper1]

You have a 572?

Okay it looks like I knew exactly what I meant and I was the only one lol.
It was previously @Armbru84 saw, but I was not the buyer lol.
I went over to his place spring of 2018 and we had a fun cutting session with all those saws and a couple others, great day .
I did however pm the guy selling the one on here, but I was in line, what's a guy to do.

 

[Bigmac]

Nice! Do you think it has enough powa to climb vertical yet?!

It wants to go vertical! lol it’s kind of hard to discribe, but the moment you let out the clutch at 1/4 throttle going to full, it has what feels like instant torque and rpm, the bike wants to go! I like it! Lol

I want to try a different needle and power jet settings and probably a different pilot jet. I also need to run something fast, so I can tell what’s going on, racing slow stuff dose not help! Lol