poulan 2900

[T.Roller]

I found my father's 2900 in his shop yesterday. This saw was the one he bought and cleared our property with 20 years ago. The saw wasn't ran much after than and is in pretty good condition. I would like to get this saw running again. It started with a little fuel in the carb. I'd like to get a 16" bar as the 20" is too much. My father passed away last August so it would mean alot to keep this saw. I ordered a carb kit for it and picked up a fuel line and filter. Anyone know right offhand the bar and chain I'd need for this saw. Any info would be great!

 

[Mycamaro_68]

I found my father's 2900 in his shop yesterday. This saw was the one he bought and cleared our property with 20 years ago. The saw wasn't ran much after than and is in pretty good condition. I would like to get this saw running again. It started with a little fuel in the carb. I'd like to get a 16" bar as the 20" is too much. My father passed away last August so it would mean alot to keep this saw. I ordered a carb kit for it and picked up a fuel line and filter. Anyone know right offhand the bar and chain I'd need for this saw. Any info would be great!

Takes a K041 mount bar and more than likely 325 pitch chain

 

[Jughead]

Takes a K041 mount bar and more than likely 325 pitch chain

oh no not the rare k041!

 

[Mycamaro_68]

oh no not the rare k041!

ULTRA RARE!!!!!

 

[Motorhead]

16" .050 .325 66 dl.I have a couple of them,Good low dollar chainsaws.

 

[T.Roller]

Thank you guys. I figure it'll make a decent small saw. Anyone have experience with them?

 

[merc_man]

Sorry for your loss. Should just hang er up as a remnder.
I got my dads little dolmar 420. Iv never ran it. Just trip over the dam thing on the spare room floor every day lol.

 

[T.Roller]

Sorry for your loss. Should just hang er up as a remnder.
I got my dads little dolmar 420. Iv never ran it. Just trip over the dam thing on the spare room floor every day lol.

Thank you bud. Ill get it running and probably won't use it much. I have a couple other small saws. Would just like to get it in running order.

 

[old guy]

I also have two of them, I put a lot of work in one of them last winter, I raised the comp from 138 to 164, did some porting & piston work and using a 14" bar & stihl PS chain it is pretty fast. I like em stock too.
I had to change the sprocket for low pro chain, they do come with .325 chain.

 

[Motorhead]

I also have two of them, I put a lot of work in one of them last winter, I raised the comp from 138 to 164, did some porting & piston work and using a 14" bar & stihl PS chain it is pretty fast. I like em stock too.
I had to change the sprocket for low pro chain, they do come with .325 chain.

I also have a 310,It s 49cc.I like those little saws,Very light weight.

 

[old guy]

I also have a 310,It s 49cc.I like those little saws,Very light weight.

I had not heard of that model, how old are they?

 

[Motorhead]

Built in the 90s,The 310 was a poulan pro.The 3100 was Electrolux poulan.Same 49 cc saws.

 

[Mycamaro_68]

Thank you guys. I figure it'll make a decent small saw. Anyone have experience with them?

I have the "pro" model PP295. For what it is its a pretty decent little saw, 46cc's of screaming fury! Mine came with a 20" bar and I was surprised how well it handled it but it runs so much better with a 16". I also have a couple spare motors for it to try some porting and see what I can screw up... I mean learn

 

[T.Roller]

I have the "pro" model PP295. For what it is its a pretty decent little saw, 46cc's of screaming fury! Mine came with a 20" bar and I was surprised how well it handled it but it runs so much better with a 16". I also have a couple spare motors for it to try some porting and see what I can screw up... I mean learn

I have an extra saw to go along eith this one too. Everything is good on it except just been sitting with fuel. Ill save it for parts.