Post up your ported cylinder Artwork

[huskihl]

That’s better than the stock 440 piston wash I took a pic of Matt. View attachment 216877

Looks kinda normal. I bet the pto side opens 1-2* earlier than fw side

 

[Mattyo]

it is quite symmetrical

Just dunno what it means lol. Saw could stand for a little more pop. ..so I'll have the basr and squish cut. But it ran quite good. I overcut the ex... and filled the intake. It's about 94 122 79 ish right now.

 

[mdavlee]

Just dunno what it means lol. Saw could stand for a little more pop. ..so I'll have the basr and squish cut. But it ran quite good. I overcut the ex... and filled the intake. It's about 94 122 79 ish right now.

Raise the transfers 5 degrees and call it good.

 

[Mattyo]

I'll do that on another head i have. Just screwing around at this point. Thanks mike

 

[huskyboy]

Looks kinda normal. I bet the pto side opens 1-2* earlier than fw side

Yep pretty uneven/lopsided with the ring in the bore looking at it, so it was quite a difference if I could see it by eye. Forgot what side it was, I evened them though.

 

[huskihl]

 

[drf256]

Nice again Kevin. Another XS is born.

 

[huskihl]

Nice again Kevin. Another XS is born.

Thx RC.
3 of ‘em actually

 

[drf256]

XS3

Noice.

 

[srcarr52]

Looks kinda normal. I bet the pto side opens 1-2* earlier than fw side

They always look a little asymmetrical because the flywheel side of the cylinder is much cooler.

 

[Agent Smith]

What do you fellas think about my port work on my 036 project? The muffler i did awhile ago

 

[Agent Smith]

 

[MG porting]

View attachment 218958 View attachment 218959

Good job she'll be a good runner.

 

[drf256]

What do you fellas think about my port work on my 036 project? The muffler i did awhile ago
View attachment 218953 View attachment 218954 View attachment 218955 View attachment 218956 View attachment 218957

Looks great.

 

[smokey7]

@huskihl what were those jugs you had??? 395s? Is that one of those new ccc piston from Dave?

 

[huskihl]

@huskihl what were those jugs you had??? 395s? Is that one of those new ccc piston from Dave?

661. And yes, ccc from Dave

 

[smokey7]

Why does that center jug look so different?

 

[huskihl]

Why does that center jug look so different?

It’s optically delusional. I saw it too. They’re all nearly identical, aside from the center one being a Meteor

 

[huskihl]

372 xpw cylinder from a couple days ago

 

[cus_deluxe]

372 xpw cylinder from a couple days ago

View attachment 221451 View attachment 221452 View attachment 221453 View attachment 221454 View attachment 221455

kevin,
how are you able to get that 4" grinder in there and do such a clean job? asking for a friend....