Post up your ported cylinder Artwork

[PA Dan]

Nice, is that an 046-D cylinder?

It's a 12mm 044 Mike.

 

[huskihl]

Nice, is that an 046-D cylinder?

12mm 044/ early 440

 

[MustangMike]

That little "extra" hole in the bottom fooled me, and even though you didn't show it, all 044/440s were D cylinders!

Looking forward to seeing it in the wood!

You had mentioned you picked up a few of them!

 

[huskihl]

That little "extra" hole in the bottom fooled me, and even though you didn't show it, all 044/440s were D cylinders!

Looking forward to seeing it in the wood!

You had mentioned you picked up a few of them!

I have a few 10 and 12mm on the shelf but this one was new oem shipped with the customer’s saw

 

[cus_deluxe]

View attachment 295195 View attachment 295196 View attachment 295197 View attachment 295198 View attachment 295199

that zaust port is a beauty.

 

[huskihl]

that zaust port is a beauty.

Taint bad.

Thanks buddy

 

[Lightning Performance]

Sometimes you get an idea but it takes a bit to find the right person for the job. I suggested the tooling and the mount and for the first time was given the green light to do this.
200T transfer ports machined to be all dead even with my new recipe. This one is mean. Finish the ports by hand with a few tiny tools to blend things in. The next one is getting run as is before finishing the rough edges. This was the only way I could really nail down a dead flat roof and even flow across the face of the window. The jug is not finished in any of these pics. Close to finished and roughed in mostly.

 

[Lightning Performance]

 

[Lightning Performance]

Pics are all mixed up

 

[Nutball]

Mind blown. I've never seen so many pics in a post by Kenny.

 

[Redfin]

Holy sheet The Kenny posted pics. Where is Jeefus?

 

[PA Dan]

Holy sheet The Kenny posted pics. Where is Jeefus?

So I wasn't dreaming....

 

[huskihl]

Holy sheet The Kenny posted pics. Where is Jeefus?

I think it’s just one pic, blown up and resized 27ty different ways

 

[Lightning Performance]

I was completely out of control.
Had to take a nap after that.

 

[ZukiRyder440]

266XP experimental cylinder. Definitely maybe possibly gonna polish the exhaust.

 

[ZukiRyder440]

Intake.

 

[ZukiRyder440]

Used a right angle for the first time today. Defini tely something to get used to but its manageable.

 

[Slumberjack]

Used a right angle for the first time today. DefiniView attachment 296144 tely something to get used to but its manageable.

Looking good buddy!

 

[Nutball]

Used a right angle for the first time today. DefiniView attachment 296144 tely something to get used to but its manageable.

Looks like the easy side to me, let's see the flywheel side port.

 

[ZukiRyder440]

Looks like the easy side to me, let's see the flywheel side port.

I forgot to take a pic of the flywheel side... im a bonehead... Ill take moar pics tomorrow.