Oregon 33RWDD009

[davidwyby]

33” Oregon LW bar came with one chain. Don’t see DL count online. Instead of counting all the links I compared to a 32” 105DL and a 36” 115DL. I came up with 110 DL. Sound right?

Thanks

 

[jacob j.]

110 drivers for 3/8ths usually works perfectly with a 34" regular Husky or medium Stihl mount. So 110 in 3/8ths might be a driver or two too long for the 33".

 

[mrxlh]

33” Oregon LW bar came with one chain. Don’t see DL count online. Instead of counting all the links I compared to a 32” 105DL and a 36” 115DL. I came up with 110 DL. Sound right?

Thanks

DL should be stamped on the bar?

 

[davidwyby]

DL should be stamped on the bar?

One would think/hope, but no, just PN

 

[mrxlh]

Dam

 

[Traprunner]

I have a 338rwdd that says 110 drivers on it if that helps.

 

[mrxlh]

110 drivers for 3/8ths usually works perfectly with a 34" regular Husky or medium Stihl mount. So 110 in 3/8ths might be a driver or two too long for the 33".

Must be a similar deal with 28” bars, some are 92 some are 93, FWIW, the Tsumura 28” 92 dl takes a 93 dl just fine…

 

[stihl livin]

@mdavlee

Mike may know this answer.

 

[davidwyby]

Must be a similar deal with 28” bars, some are 92 some are 93, FWIW, the Tsumura 28” 92 dl takes a 93 dl just fine…

Seems like it depends on whether it’s on a husky or Dolmar but I can’t remember which way.

 

[stihl livin]

So I text mike and he ran a stihl mount rw bar with 110 drive links. He said they are the same length bars but the husky crack is set man farther then stihl so you lose an inch. He can’t get his login to work

 

[davidwyby]

I’m getting some chains from Greg Newman I’m gonna break n spin so I can experiment.

 

[mrxlh]

Seems like it depends on whether it’s on a husky or Dolmar but I can’t remember which way.

Tsumura says 92 on the Husky, all my 28” chains are 93 and they work just fine. If I do run into a problem, I have a breaker and spinner as well. It was however a Makita 7900 that I had it mounted on so who knows. I do know that the Dolkita/Makmar bar adapter to large mount Stihl is different than the large Husky to large Stihl. Kevin @huskihl gave me a tip a while back, if you want DL counts to stay the same lay the bar that works on the one you are adapting too and make the slot length the same.

 

[davidwyby]

*IIRC* 93 was too long on my 7900 without an 8 pin

 

[Squareground3691]

33” Oregon LW bar came with one chain. Don’t see DL count online. Instead of counting all the links I compared to a 32” 105DL and a 36” 115DL. I came up with 110 DL. Sound right?

Thanks

Yea , that’s correct on my Oregon LW bars

 

[Squareground3691]

Yea , that’s correct on my Oregon LW bars

If you put .404 tips on , its 95DL for 32”and 104DL for 36” ,

 

[Maintenance Chief]

83 in .404 for a 28"
65 in .404 for a 20"
Both of those are for 7 pin ,bump 1 for 8 pin.

 

[davidwyby]

@thinair do you remember?

 

[Squareground3691]

110 DL

 

[Squareground3691]

110 DL

338RWDD009 - BAR, 33IN POWERCUT RW, OREGON

PowerCut Guide Bar, 33

forestdepot.com

 

[davidwyby]

I should have mentioned that they call it 33", but it's very nearly as long as my 36".