NSP2. Cuz PA WiFi sucks

[Dream]

I make sure I have multiples.

Cause they hide.

Guess I'll get one of the truck. Thats like 27 steps out there. Thats why I dont get *s-worde done, and talking to y'all sack scratchers.

 

[dall]

Whatcha waiting for? You’ve got a tractor, I know you ain’t gonna spread the gravel with a shovel and rake

still 92 here slacker
all the ones complaining about winter can take this heat and shove it up somewhere
ill take winter anytime

 

[Stump Shot]

Led Zepplin.....

The Best Damn Band To Ever Do Any Damn Thing !!!!!!!!

 

[Mastermind]

Guess I'll get one of the truck. Thats like 27 steps out there. Thats why I dont get *s-worde done, and talking to y'all sack scratchers.

You started it dammit.

 

[dall]

You started it dammit.

exactly and working on a ford is like working on a husky
you have to drag the whole tool chest under with you lol

 

[Czed]

 

[P.M.P.]

exactly and working on a ford is like working on a husky
you have to drag the whole tool chest under with you lol

My boys work truck stx 6.2l almost 200,000 miles on it.

 

[dall]

View attachment 249368

lol you know we don’t get dry heat it’s always humid

My boys work truck stx 6.2l almost 200,000 miles on it.View attachment 249370

very lucky lol

 

[Dream]

My boys work truck stx 6.2l almost 200,000 miles on it.View attachment 249370

I hear the plastic intakes can be troublesome, and always a code thrown somewhere, but they do pretty good. We have several still moving.

 

[Dream]

exactly and working on a ford is like working on a husky
you have to drag the whole tool chest under with you lol

So far not too bad. Drive shafts and transfer case are out. Only used 10,12, 13 mm wrenches and sockets. Screwdriver. Hammer. Flashlight.
Now, if I can Jack the trans up a little bit, I might be able to take the trans mount bolts out of the piece I want off and slip it out without taking the mount or crossmember out.

 

[dall]

So far not too bad. Drive shafts and transfer case are out. Only used 10,12, 13 mm wrenches and sockets. Screwdriver. Hammer. Flashlight.
Now, if I can Jack the trans up a little bit, I might be able to take the trans mount bolts out of the piece I want off and slip it out without taking the mount or crossmember out.

what year is it ?
most of the early to mid 90s was easy if you wasnt afraid of using a prybar and hammer
6 or 8 bolts and pry up the braces and beat it out of the way
lol if you move it forward you can use it to hold transmission up

 

[Saw Collector]

I make sure I have multiples.

Cause they hide.

I was given a dog years back. 1/2 beagle 1/2 Bassett. B!tch would steel my tools, rags, anything. She wasn't here long.

 

[Saw Collector]

So far not too bad. Drive shafts and transfer case are out. Only used 10,12, 13 mm wrenches and sockets. Screwdriver. Hammer. Flashlight.
Now, if I can Jack the trans up a little bit, I might be able to take the trans mount bolts out of the piece I want off and slip it out without taking the mount or crossmember out.

Don't jack it up by the "reservoir"

 

[Mastermind]

Don't jack it up by the "reservoir"

Now hold up......ain’t the “reservoir” the thing that the dipstick slides into?

 

[Dream]

what year is it ?
most of the early to mid 90s was easy if you wasnt afraid of using a prybar and hammer
6 or 8 bolts and pry up the braces and beat it out of the way
lol if you move it forward you can use it to hold transmission up

95. Put the Jack at the front of the trans bellhousing. Only had to raise it 1/4". Left crossmember and trans mount in place.

 

[redline4]

Broke...

 

[Dream]

Don't jack it up by the "reservoir"

Oh I dint.
I just jacked it up by them little round things inside the "reservoir". Had wires coming outta em. Its fine.

 

[P.M.P.]

Oh I dint.
I just jacked it up by them little round things inside the "reservoir". Had wires coming outta em. Its fine.

Yup your good

 

[Dream]

Broke...

View attachment 249384 View attachment 249385 View attachment 249386

Nah! Little JB Weld. Some silicone. Like Factry!

 

[Dream]

Ok, heres the culprit. Gasket came apart. Bolts werent really tight either. May have shifted and broke the gasket.