Not so pros 4 new and without politics or drama

[Wonkydonkey]

Good afternoon guys
It’s rain here like a horse pissing on rock

 

[Junk Meister]

I'm investing heavily in Weyland-Yutani and Umbrella Corporation.

What Currency ya usin' is the "real" question.

 

[Junk Meister]

Good morning without politics or drama.

31f heading to 61. Went to primary doctor yesterday. He agreed that stopping the Crestor is a good step toward figuring out the other pain. All this diagnostic stuffs reminds of troubleshooting an engine.

DOC --- Does it always Backfire/fart like that?

 

[Junk Meister]

489

View attachment 479818

Posi Trac?

 

[Sloughfoot]

Mornin' View attachment 479815View attachment 479816

TWO MEN!!!!?

 

[Stump Shot]

Good morning. 4°F

 

[ray benson]

Good morning. 18°F/ -8°C going up to 24°F/ -4°C.

 

[59billy]

Good morning. 42f reaching 52.

 

[SawAddictedFarmer]

Good morning! Just got in from chores and destroying rusty car parts.

 

[Wonkydonkey]

Good evening folks. . Ive be gorging on Murphys diesels YouTube channel lately…
At last I found Good old Recka, Rick with and easy start saw . He sorted in the end

- YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

youtube.com

I think He needs to practice those felling cuts.

 

[jacktheripper]

Good evening folks. . Ive be gorging on Murphys diesels YouTube channel lately…
At last I found Good old Recka, Rick with and easy start saw . He sorted in the end

- YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

youtube.com

I think He needs to practice those felling cuts.

That was painful

 

[hacskaroly]

At last I found Good old Recka, Rick with and easy start saw . He sorted in the end

Well, that was embarrassing to watch, I am surprised that the pull cord didn't come out or the recoil exploded. I wonder if whoever sold him the saw showed him the proper way to start the easy starts? I had probably been sitting with last year's gas in it....lol

 

[legdelimber]

Wonkydonkey, any chance of that having scarred the valve stem and then having a valve seal leak after a bit of run time?
My second thought would be, was there any teensy chance the broken spring ever found a way to get caught on top of the valve guide and cause an issue with the rocker travel and possibly a slightly bent push rod for it?

 

[davidwyby]

Evening gents

@Stump Shot 288 was employed to cut a Euc log for a mantel. It was all the 1500lb liftgate wanted

Mount signal

 

[Wonkydonkey]

Wonkydonkey, any chance of that having scarred the valve stem and then having a valve seal leak after a bit of run time?
My second thought would be, was there any teensy chance the broken spring ever found a way to get caught on top of the valve guide and cause an issue with the rocker travel and possibly a slightly bent push rod for it?

My mate has a spring compressor coming with all the other bits (new valves & oil seals and 2 new springs, ,head gasket as well as oil & filter (service kit)).
He believes it’s better to fix it properly first time, so he don’t loose any more time. As he needs the generator to power his tools (he’s a stone carver ) as there’s no mains where his workshop is. Also the generator is in a hole in the ground (which I will get pics of), this means it’s not as easy to just take the whole thing to a garage.

When we (“I”) get it completely apart I will go over it meticulously. And see how much spring is missing etc

However I do believe, the intake spring broke a short while ago and it was running badly, but still runnng due to the air filter having the lower side paper part destroyed! Blowback off spent gasses etc.
Hopefully I will get a lot of pics as I rebuild it .

The only thing I,m not sure about is if the new valves are going to be seated properly (just put them in) or if I will have to lap/grind them in ?

The generator is about 5 yrs old and gets run about 6hrs a day 5 days a week, about 10 months a yr

 

[Wonkydonkey]

Good morning gang

 

[Junk Meister]

G' MAWNIN'
Today
A chance of flurries between 11am and noon, then a chance of snow after noon. Increasing clouds, with a temperature rising to near 35 by noon, then falling to around 29 during the remainder of the day. Windy, with a northwest wind 18 to 26 mph, with gusts as high as 41 mph. Chance of precipitation is 50%.

 

[Tor R]

Good morning ladies and boys

 

[ray benson]

Good morning. 26°F/ -3°C going up to 37°F/ 3°C. Maybe an inch of snow coming this morning

 

[ray benson]

Good evening chubbys..

I got a job this morning friend needs help . His yanmar L100n generator broke a spring (intake valve spring, )

Yeh ok, what’s the deal.. just fix it .. “please”

Darn limited spaces fmo.. . Anyhow 1.5hrs later and I have the head off . Waitin for parts now and that’s probably Monday but really Tuesday..

Oh, while your here, can you help me wire in this fancy dash cam & reversing rear view mirror… in my land rover

Edit ; add pic broken intake valve spring
View attachment 479756

You may have the service manual, but if not this is for a L100.